Prev
Since I have trouble getting marks/stains off of starboard, I laminated the table with the same white laminate I used in the cabin around the sink/stove.
Next
Prev
With a heat gun, I bent a piece of flexible molding around the table for the rocking lip. Used a nail gun to hold it in place. Then putty for the nail holes.
Since I have trouble getting marks/stains off of starboard, I laminated the table with the same white laminate I used in the cabin around the sink/stove.
Hinges with 3 coats of spar varnish on the supports. Ready to be mounted.
Next
C

Since I have trouble getting marks/stains off of starboard, I laminated the table with the same white laminate I used in the cabin around the sink/stove.

Since I have trouble getting marks/stains off of starboard, I laminated the table with the same white laminate I used in the cabin around the sink/stove.
Click to expand...
There are no comments to display.

Media information

Category
Cockpit Seating and Table Installation
Album
Hinge wood supports made from an old teak deck chair.
Added by
CaptainJeff
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top