Prev
shaping all the pieces with a 9 inch sander and 30 grit - i think
Next
Prev
it was heavy glass mat for the large panel areas
first piece - saved from having to stand on head to glass this in from position!
resin-roller! got to have one of these to work-in resin and work-out air
shaping all the pieces with a 9 inch sander and 30 grit - i think
ahead of time prep work for the joint areas
gel coat yes :P glassed in from the bottom all the way up!
putty in prep for a nicer final finnish of the glass matt to be added and then gel coated
Next

shaping all the pieces with a 9 inch sander and 30 grit - i think

  • Media owner
  • Date added
shaping all the pieces with a 9 inch sander and 30 grit - i think
Click to expand...
There are no comments to display.

Media information

Category
v-berth recon (redfox)
Album
tearing out the first plan (additional fuel tank was first here) and going in with a new arrangement of the under-berth area of the Classic :0) ... the water tank and storage plan instead
Added by
Date added
View count
0
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top