Prev
Replaced the coring and was able to save the original deck cutoffs to skin the interior.
Next
Prev
Holes cut for new speakers, new radio and USB port. Also changed the wiring ports behind the controls on the starboard side.
Front bulkhead back in place. Decided to upgrade the radio and speakers as well as add a USB port.
Better picture of the original cutoffs being used to skin the interior.
Replaced the coring and was able to save the original deck cutoffs to skin the interior.
West System Epoxy for the win. Did ruin a hat but saved my bald head from epoxy drippings from the repairs.
Ended up removing the front bulkhead for access, had to cut back the bottom side of the deck about 4 inches or so around the hatch opening to access all the damaged coring.
Had to drop the front bulkhead to access the area of damage on the aft side of the hatch. Front bulk head held on by a sealant and screws. Not sure if sealant was factory original or not.
Next
B

Replaced the coring and was able to save the original deck cutoffs to skin the interior.

  • Media owner Brian J
  • Date added
Replaced the coring and was able to save the original deck cutoffs to skin the interior.
Click to expand...
There are no comments to display.

Media information

Category
Bomar Hatch Water Infiltration Repair
Album
Pre repair photo. Bomar hatch in foredeck of a 16 Angler. Noticed a delayed leak around the edge of the hatch every time it rained.
Added by
Brian J
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top