Prev
Original hole for 3/4" through-hull that connects to sink drain, marked for enlarging to fit 1" through-hull.
Next
Prev
New 1" through-hull set in place to check fit - nice and snug.
Dremel with sanding drum used. Pardon the blur but it gives the idea.
After enlarging to new size - used Dremel with sanding drum, sanded to pencil line. I taped a plastic bag around the hole on the inside to keep dust out of the boat, and also had a vacuum nozzle taped to the topsides on the outside where I was working.
Original hole for 3/4" through-hull that connects to sink drain, marked for enlarging to fit 1" through-hull.
"Tool" for removing through hull since I didn't have the proper tool on hand. Old junk file to catch on the "ears" inside the through hull and vise grips to hold file.
the lab
reinstalled
Next
S

Original hole for 3/4" through-hull that connects to sink drain, marked for enlarging to fit 1" through-hull.

  • Media owner Sunbeam
  • Date added
Original hole for 3/4" through-hull that connects to sink drain, marked for enlarging to fit 1" through-hull.
Click to expand...
There are no comments to display.

Media information

Category
Fresh-water system related
Album
fill removed, dry core
Added by
Sunbeam
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top