Inspection Plates - Cabin sole just forward of door. Condensation running down sides and under unsealed cabin sole is the likely source of the slight moisture. Dries completely if the plate is left off while the boat is moored or on the hard.

Helm Seat - Bolt hole. This is the useless, overdrilled hole into which the longer bolt in the previous photo was wedged, not screwed. I filled it with JB Weld and a threaded stud.

Helm Seat - Slider bolts. These are from the "corrected" second shipment of the seat. The one longer bolt was wedged in the apparently re-drilled and stripped hole in the seat. See next photo.

Inspection Plates - Cockpit sole just aft of door. No water.

Inspection Plates - Cabin sole just forward of door. Condensation running down sides and under unsealed cabin sole is the likely source of the slight moisture. Dries completely if the plate is left off while the boat is moored or on the hard.

Inspection Plates Cockpit sole between fuel tanks. No water.

Inspection Plates - Cockpit sole just aft of door. No water.

Inspection Plates - Cabin sole just forward of door (in upper portion of picture). Cockpit sole just aft of door (in lower portion of picture). No water present under cockpit sole.

N

Inspection Plates - Cabin sole just forward of door. Condensation running down sides and under unsealed cabin sole is the likely source of the slight moisture. Dries completely if the plate is left off while the boat is moored or on the hard.

NORO LIM
Jun 14, 2010

There are no comments to display.

Media information

Category: NORO LIM -Miscellaneous Mods and Projects

Album: New LED Anchor Light & Radar Reflector Assembly

Added by: NORO LIM

Date added: Jun 14, 2010

View count: 1

Comment count: 0

Rating: 0.00 star(s) 0 ratings

Share this media

Facebook X Bluesky LinkedIn Reddit Pinterest Tumblr WhatsApp Email Link

Copy image link

Copy image BB code

Copy URL BB code with thumbnail

Copy GALLERY BB code

Top