Prev
I used butyl tape (two layers in this application) from Sailrite to bed the frame.
Next
Prev
I also added a little washer of butyl tape to each one and didn't turn the screw head once it made contact.
The hatch was previously fastened with wood screws (they only threaded the top layer of solid fiberglass and dug into the balsa core. I replaced them all with machine screws washers and nyloc nuts.
It goes around the corners just fine.
I used butyl tape (two layers in this application) from Sailrite to bed the frame.
It turned out great and all the screw holes are isolated from the balsa (something the factory should really have done too!)
I was pretty diligent when working with the epoxy so I just had to hand sand the edge.
Thanks to another boater with a rental car I got the third tube I needed to finish the fill
Next
S

I used butyl tape (two layers in this application) from Sailrite to bed the frame.

  • Media owner sebastien
  • Date added
I used butyl tape (two layers in this application) from Sailrite to bed the frame.
Click to expand...
There are no comments to display.

Media information

Category
Front hatch repair
Album
The main hatch has has been leaking for a while but I wanted to get off the great lakes before taking it apart (I made a quick and dirty rain cover that attached into the four existing snaps for the sun shade)
Added by
sebastien
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top