Prev
I ended up not liking the clamps I had initially used to clamp the panel to the rack so I replaced them with these beefier ones. Much better.
Next
Prev
Then I used 2 of the other clamps to mount the anchor/running light above the door.
I ended up not liking the clamps I had initially used to clamp the panel to the rack so I replaced them with these beefier ones. Much better.
Monitor is now in it's new location. I figured if I put it somewhere where I'd see all the time I'd get obsessed with watchinging it, so this seemed like a good place for it. We'll see how it works out. Having done that, this project is done!!
This was charge input earlier this morning when we had sun, which was roughly 70 degrees off axis from the panel. Should get somewhere around 7-9 amps input, on axis, and sunny.
This shows AMPs going into the battery (toggle switch in up position). We are totally clouded over this afternoon so input is weak.
This shows AMPs being used (toggle switch in down position). It's currently showing amps drawn while the fridge was running. This will get mounted in the cabin somewhere, once I figure out where.
Next
D

I ended up not liking the clamps I had initially used to clamp the panel to the rack so I replaced them with these beefier ones. Much better.

I ended up not liking the clamps I had initially used to clamp the panel to the rack so I replaced them with these beefier ones. Much better.
Click to expand...
There are no comments to display.

Media information

Category
Solar Install
Album
160 watt Renolgy solar panel mounted to the Desert Dory roof rack.
Added by
Desert Dory
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top