Prev
Here's one of the finished mahogany strips across the top of the cabin.
Next
Prev
Filler board in place. Just have to figure out a cushion now. Anybody have any matching material from 1989? Lol...
Used up some of the left over mahogany and birch ply from the fridge shelf project to fill in the opening at the front of the v-berth. Velcro tabs used to keep it in place and to keep it from rattling.
While I doubt the fridge shelf would slide out on it's own I added this spiffy little slide bolt latch to secure it while underway, "just in case".
Here's one of the finished mahogany strips across the top of the cabin.
2 12v sockets low on the bulkhead near the helm.
Since I removed the cigarette lighter/socket to put in my windlass switch, I added 2 new 12v sockets down lower on the bulkhead. One will be used to plug in the fridge.
My stock switch panel only has capacity for 6 circuits so today I added a Blue Sea 12 circuit fuse panel.
Next
D

Here's one of the finished mahogany strips across the top of the cabin.

Here's one of the finished mahogany strips across the top of the cabin.
Click to expand...
There are no comments to display.

Media information

Category
Interior Stuff
Album
Then I pulled this destroyer wheel from the fishing boat, wrapped it with some 550 Paracord, and installed it in the Dory. Nice little update from the "vintage" plastic wheel.
Added by
Desert Dory
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top