Here is the wiring placed in cream colored conduit running right up the side of the window. I used this on the transom to cover the depth sounder cable and thought I would try it here.

This is the Rustoleum paint that I used. I sprayed my spare prop to see how close it was to the C Dory gel coat color.

This is the stick-on conduit I used.

A close up of the wiring. I'm putting all of my wiring in this stuff. Much faster and cheaper than driving little stainless screws into the boat and much nicer looking than black smurf tubing.

Here is the wiring placed in cream colored conduit running right up the side of the window. I used this on the transom to cover the depth sounder cable and thought I would try it here.

Once dry, it gets sprayed with an off white paint that is fairly close to the gel coat color. The surface of the rubber paint would attract too much dirt. Notice the black conduit hanging down. Black wiring was strung all around the boat. I can fix that.

Even the roof of the cabin gets a layer.

I used my shop vac to blow warm air in. I left it on over night because I had sprayed so much material (about 3 gallons).

M

Here is the wiring placed in cream colored conduit running right up the side of the window. I used this on the transom to cover the depth sounder cable and thought I would try it here.

Marco Flamingo
Jan 19, 2016

There are no comments to display.

Top