Prev
Helm Seat - Bolt hole. This is the useless, overdrilled hole into which the longer bolt in the previous photo was wedged, not screwed. I filled it with JB Weld and a threaded stud.
Next
Prev
Helm Seat - Very comfortable.
Helm Seat - Seat installed on scrap lumber mounting frame for testing.
Helm Seat - Love the new LeBroc seat, BUT, - look at these: Three mismatched bolts from the first shipment of the seat. The fourth was wedged in place. These bolts "attached" the wrong slider to the seat.
Helm Seat - Bolt hole. This is the useless, overdrilled hole into which the longer bolt in the previous photo was wedged, not screwed. I filled it with JB Weld and a threaded stud.
Helm Seat - Slider bolts. These are from the "corrected" second shipment of the seat. The one longer bolt was wedged in the apparently re-drilled and stripped hole in the seat. See next photo.
Inspection Plates - Cockpit sole just aft of door. No water.
Inspection Plates - Cabin sole just forward of door. Condensation running down sides and under unsealed cabin sole is the likely source of the slight moisture. Dries completely if the plate is left off while the boat is moored or on the hard.
Next
N

Helm Seat - Bolt hole. This is the useless, overdrilled hole into which the longer bolt in the previous photo was wedged, not screwed. I filled it with JB Weld and a threaded stud.

  • Media owner NORO LIM
  • Date added
Helm Seat - Bolt hole. This is the useless, overdrilled hole into which the longer bolt in the previous photo was wedged, not screwed. I filled it with JB Weld and a threaded stud.
Click to expand...
There are no comments to display.

Media information

Category
NORO LIM -Miscellaneous Mods and Projects
Album
New LED Anchor Light & Radar Reflector Assembly
Added by
NORO LIM
Date added
View count
0
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top