Prev
Glued a couple pieces of maple together and drilled pockets for blind nuts. This will be the mount for the Blue Seas battery selector switch and smart relay.
Next
Prev
Here's the house battery all snuggled in.
Starboard lazarette: Everything in place and hooked up. Since we're landlubbers, I went ahead and added a switch to the smart relay ground wire. Turning the switch to off disables the smartness of the smart relay ( no parasitic drain on the batteries while the boat is on the trailer on the side of the house).
Slathered on some 5200 and clamped it into place.
Glued a couple pieces of maple together and drilled pockets for blind nuts. This will be the mount for the Blue Seas battery selector switch and smart relay.
Cables and box. Should work just fine.
Port lazarette: this is where the house battery is going. Drilled a hole for the cables, added a grommet and some anchors for the battery hold down strap.
Next
D

Glued a couple pieces of maple together and drilled pockets for blind nuts. This will be the mount for the Blue Seas battery selector switch and smart relay.

Glued a couple pieces of maple together and drilled pockets for blind nuts. This will be the mount for the Blue Seas battery selector switch and smart relay.
Click to expand...
There are no comments to display.

Media information

Category
Blue Seas add a battery house battery install.
Album
Port lazarette: this is where the house battery is going. Drilled a hole for the cables, added a grommet and some anchors for the battery hold down strap.
Added by
Desert Dory
Date added
View count
2
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top