Generator can run fine underway!
Next
Prev
Generator can run fine underway!
There is room to adjust all the guages and switches, check the oil and pull the starter without removing the genset. I put heavy felt pads on both fore and aft walls to prevent chafe damage, esp. since the aft wall has pop-riveted vents down low.
Without cutting openings, the box will hold a Honda i2000 and four, one gallon fuel tanks. I know about and have an extended run tank, but this works better for me now. You have to put the genset in exhaust first, vertically, then slide it to the left and drop front end down. This does not seem to spill oil, although sideways tilting will.
Purchased at Tractor Supply, the 24 inch, underbody box was made by Delta: Model No. 407210.
Everybodys' dream! A Tractor Supply box on your C-Dory!
Barely room to slide a 24 inch box between the swimstep handles, so I put a huge aluminum, hinged flap on the exhaust side.
This is the most extreme cut-out you'd need and I still had very little seawater intrusion. I had to allow for the genset to slide this way for the 30 amp yoke to clear the restricted lid opening.
Next
D

Generator can run fine underway!

  • Media owner drjohn71a
  • Date added
Generator can run fine underway!
Click to expand...
There are no comments to display.

Media information

Category
Generator Box
Album
Everybodys' dream! A Tractor Supply box on your C-Dory!
Added by
drjohn71a
Date added
View count
5
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top