Prev
(Dora~Jean) Added another 8 AWG wire from batteries to windlass, fab'd plate to tap into line for the Wallas.
Next
Prev
(Dora~Jean) Intake/exhaust hose and inside cabin hot air duct. Note fabbed insulating plate for intake/exhaust hose, it is spaced 1/4" on top from fiberglass.
(Dora~Jean) Access hole for tubing to resevoir and air return.
(Dora~Jean) Combo intake/exhaust hull lead-thru.
(Dora~Jean) Added another 8 AWG wire from batteries to windlass, fab'd plate to tap into line for the Wallas.
(Dora~Jean) Installation Location under galley cabinet.
Wallas 1300 Installation
Next
D

(Dora~Jean) Added another 8 AWG wire from batteries to windlass, fab'd plate to tap into line for the Wallas.

  • Media owner Dora~Jean
  • Date added
(Dora~Jean) Added another 8 AWG wire from batteries to windlass, fab'd plate to tap into line for the Wallas.
Click to expand...
There are no comments to display.

Media information

Category
Wallas 1300 Heater
Album
Wallas 1300 Installation
Added by
Dora~Jean
Date added
View count
2
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top