Prev
Wallas 1300 Install -DSC06165. Pieces cut for rebuilding the forward part of the shelving.
Next
Prev
Wallas 1300 Install -DSC06175. Wires connected. (Note the extra right angle brace at the top of the hanger bracket. Just a suspenders and belt move to make sure the heater stays put.)
Wallas 1300 Install -DSC06174. New shelf support in place.
Wallas 1300 Install -DSC06171. New shelving support assembled with power line connectors mounted.
Wallas 1300 Install -DSC06165. Pieces cut for rebuilding the forward part of the shelving.
Wallas 1300 Install -DSC06163 - Protection against inadvertently bumping the switch on or off made from a small scrap of 1/2" starboard
Wallas 1300 Install -DSC06159 Remote switch is mounted on the side of the helm where it is easy to reach from the helm seat, First Mate's seat, or v-berth.
Wallas 1300 Install -DSC06158. Ten liter Fuel tank in place. Two extra fuel jugs will just fit in next to it (one is visible - with white cap). Tie down straps to be installed.
Next
N

Wallas 1300 Install -DSC06165. Pieces cut for rebuilding the forward part of the shelving.

  • Media owner NORO LIM
  • Date added
Wallas 1300 Install -DSC06165. Pieces cut for rebuilding the forward part of the shelving.
Click to expand...

Media information

Category
NORO LIM Wallas 1300 Heater Installation
Album
Wallas 1300 Install - - DSC06129 Aft seat, shelving, & table; Heater to go where the shelving narrows - next to, and just forward of the aft seat. Chose the Wallas 1300 model because it's the most compact, and because I already had a kerosene stove.
Added by
NORO LIM
Date added
View count
5
Comment count
1
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top