Prev
Here is the backside. I used a bulkhead fitting with 1/4" threads on both ends inside the outer threaded fitting. The fitting came from http://www.mcmastercarr.com
Next
Prev
Then I made up a short hose with a primer bulb on it to pump the gas.
I bought the mating connector with a hose barb.
Here is what the Honda fitting looks like without the cap.
Here is the backside. I used a bulkhead fitting with 1/4" threads on both ends inside the outer threaded fitting. The fitting came from http://www.mcmastercarr.com
Close up of port. I used a Honda outboard connector with 1/4" threads. The cap is a plastic/rubber thing I had that just happened to fit. It will surely degrade quickly and I'll have to find something else.
Fuel port next to outboard cable exit with rubber dust cap
Next
R

Here is the backside. I used a bulkhead fitting with 1/4" threads on both ends inside the outer threaded fitting. The fitting came from http://www.mcmastercarr.com

  • Media owner Ray
  • Date added
Here is the backside. I used a bulkhead fitting with 1/4" threads on both ends inside the outer threaded fitting. The fitting came from http://www.mcmastercarr.com
Click to expand...

Media information

Category
Aux fuel port
Album
Fuel port next to outboard cable exit with rubber dust cap
Added by
Ray
Date added
View count
5
Comment count
1
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top