Prev
Chain hoist to lift main outboard. 1000lb strap, secured to 3 laminated 2x4s spanning 4 ceiling joists, and to an adjacent 6x6 strutting beam.
Next
Prev
Area with dull-sounding hammer blows.
Chain hoist to lift main outboard. 1000lb strap, secured to 3 laminated 2x4s spanning 4 ceiling joists, and to an adjacent 6x6 strutting beam.
Fuel tanks removed and tank area cleaned.
Area behind starboard fuel tank; dull-sounding hammer blows in centre of this area.
Drillbit shavings from exploratory holes down into the transom from the top. Wet, rotten balsa core from upper 2" below the transom cap (right) and dry balsa from ~3" below the transom cap (left).
Next
C

Chain hoist to lift main outboard. 1000lb strap, secured to 3 laminated 2x4s spanning 4 ceiling joists, and to an adjacent 6x6 strutting beam.

  • Media owner Ctarmigan
  • Date added
Chain hoist to lift main outboard. 1000lb strap, secured to 3 laminated 2x4s spanning 4 ceiling joists, and to an adjacent 6x6 strutting beam.
Click to expand...
There are no comments to display.

Media information

Category
Transom repair
Album
Fibreglass skins separated beneath black plastic transom cap, exposing core.
Added by
Ctarmigan
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top