Prev
Bought used 03 EZ Alum tandem to replace single axle. Refitting for CD. Sun canopy for working in the heat!
Prev
Underside how chain is attached to main trailer beam. Stainless screw on with dab of JB weld and padlock for security.
OOOPS INSPIRED: Added 7100Lb W/L heavy equipment ratchet chain binder (foldable handle) to tie down front end as second safety chain. Secured to bow post and main trailer beam with 1/2" galv. chain. Should not come up again (or forward) unless I lose the bow eye. Chain is linked under trailer with a full oval screw on connector and locked with a padlock as anti theft precaution. I'm not intending to put this in a thread until it has been well tested.
4x6x12' PT main bunks mounted just inside the outer edges of the 22' I have heard it is important that PT lumber NOT come in contact with aluminum. The bunks are covered with plastic slides though I left about 4' carpet only to get some friction. There are two short plastic covered composite bunks that help support the transom weight. 2 keel rollers forward.
Bought used 03 EZ Alum tandem to replace single axle. Refitting for CD. Sun canopy for working in the heat!
Next
C

Bought used 03 EZ Alum tandem to replace single axle. Refitting for CD. Sun canopy for working in the heat!

  • Media owner cemiii
  • Date added
Bought used 03 EZ Alum tandem to replace single axle. Refitting for CD. Sun canopy for working in the heat!
Click to expand...
There are no comments to display.

Media information

Category
TRAILER MODS.
Album
Bought used 03 EZ Alum tandem to replace single axle. Refitting for CD. Sun canopy for working in the heat!
Added by
cemiii
Date added
View count
1
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top