Prev
(AnchortownJim) Nicro Vent 2000 Day/Night mounted in the hatch.
Next
Prev
(AnchortownJim) Trim Master pump, mounted in the port lazerette.
(AnchortownJim) Trim Master trim tab on the port side.
(AnchortownJim) Paper towel holder held up with industrial strength double sided foam tape.
(AnchortownJim) Nicro Vent 2000 Day/Night mounted in the hatch.
(AnchortownJim) The drawers have full extension slides.
(AnchortownJim) The drawers I built to fill the void from the removed ice box. The fronts are made out of 3/4" Starboard.
(AnchortownJim) Glued a piece of 3/4" marine plywood to the hull with 3M 4200. Mounted the DC bus bars, one for the switched house circuits, one for non-switched and a common ground bus. This was driven by the installation of the windless.
Next
A

(AnchortownJim) Nicro Vent 2000 Day/Night mounted in the hatch.

(AnchortownJim) Nicro Vent 2000 Day/Night mounted in the hatch.
Click to expand...
There are no comments to display.

Media information

Category
Coho Improvements
Album
(AnchortownJim) Quick ASTER 500 mounting plate made out of 3/16" 6061 aluminum, prior to being epoxied to the deck with MarineTex, side view.
Added by
AnchortownJim
Date added
View count
3
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top