IMG 4085 2

IMG 4085 2

  • Media owner sebastien
  • Date added Oct 8, 2021
  • Reaction score 0
  • Comments 0
the bow bracket is a little longer than the aft because the boat get a little wider forward

the bow bracket is a little longer than the aft because the boat get a little wider forward

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
this cheap project came together when I dumpster dove some long lenghts of 12-Gauge Electro-Galvanized Half Slot Steel Strut Channel which I painted white. I don't consider this a permanent fixture on the boat otherwise I would have sourced some sort of aluminium or even SS chanel

this cheap project came together when I dumpster dove some long lenghts of 12-Gauge Electro-Galvanized Half Slot Steel Strut Channel which I painted white. I don't consider this a permanent fixture on the boat otherwise I would have sourced some sort of aluminium or even SS chanel

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
with the 4in. thick cushion it's a fairly standard seating height but creates a good amount of space underneath

with the 4in. thick cushion it's a fairly standard seating height but creates a good amount of space underneath

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
the aft bracket length is shorter than the bow one because the the c-dory has a slightly pinched shape (also note the higher you go the wider it gets too)

the aft bracket length is shorter than the bow one because the the c-dory has a slightly pinched shape (also note the higher you go the wider it gets too)

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
I used PVC wood stuff from lowes for the back retaining pieces (the extra hole is for the fresh water fill cap on the porta potti that was too high after deciding to install dri-dek - whoops

I used PVC wood stuff from lowes for the back retaining pieces (the extra hole is for the fresh water fill cap on the porta potti that was too high after deciding to install dri-dek - whoops

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
depth of the slot (I think I made the front and back the same in the end even though the chamfer runs off level a little)

depth of the slot (I think I made the front and back the same in the end even though the chamfer runs off level a little)

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
IMG 1638

IMG 1638

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
overall measurement of each bracket

overall measurement of each bracket

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
each 1/2 MDO panel is 24x24

each 1/2 MDO panel is 24x24

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
portside aft slot

portside aft slot

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
portside bow slot

portside bow slot

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
the space underneath is easily accessible from the front or the top and perfect for fenders, the porta potti and random buckets etc..

the space underneath is easily accessible from the front or the top and perfect for fenders, the porta potti and random buckets etc..

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
portside (3 IKEA outdoor cushions fit on this platform (I'm using the ones from the house with new grey cushions so the black ones from the house don't fade differently) they are 24x24x4

portside (3 IKEA outdoor cushions fit on this platform (I'm using the ones from the house with new grey cushions so the black ones from the house don't fade differently) they are 24x24x4

  • Media owner sebastien
  • Date added Jan 30, 2021
  • Reaction score 0
  • Comments 0
3 of these will accept the 3 IKEA outdoor cushions

3 of these will accept the 3 IKEA outdoor cushions

  • Media owner sebastien
  • Date added Jan 24, 2021
  • Reaction score 0
  • Comments 0
priming the MDO

priming the MDO

  • Media owner sebastien
  • Date added Jan 24, 2021
  • Reaction score 0
  • Comments 0
primed and painted - only used boatlife life-calk because the brackets rest on the chamfer and I don't consider this to be a permanent boat fixture (hence the free wood, dumpster brackets, and repurposed IKEA cushions.

primed and painted - only used boatlife life-calk because the brackets rest on the chamfer and I don't consider this to be a permanent boat fixture (hence the free wood, dumpster brackets, and repurposed IKEA cushions.

  • Media owner sebastien
  • Date added Jan 24, 2021
  • Reaction score 0
  • Comments 0
setting up the MDO bracket for the slots

setting up the MDO bracket for the slots

  • Media owner sebastien
  • Date added Jan 24, 2021
  • Reaction score 0
  • Comments 0
S

setting up the MDO bracket for the slots

  • Items 18
  • Album owner sebastien
  • Date created
There are no comments to display.

Album information

Category
kockpit settee
Album owner
sebastien
Date created
Item count
18
View count
1,221
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

S

sebastien

Media items
499
Albums
25
Can view media items
Inherited from category
Can add media items
Album owner only

Share this album

Back
Top