Re-inserting rubber part in rubrail channel.

Re-inserting rubber part in rubrail channel.

  • Reaction score 0
  • Comments 0
1" #10 machine head screw with fender washer and nylock for securing rubrail.

1" #10 machine head screw with fender washer and nylock for securing rubrail.

  • Reaction score 0
  • Comments 0
After laying in balsa, starting to wet-out top.

After laying in balsa, starting to wet-out top.

  • Reaction score 0
  • Comments 0
Minimum order of 64sq ft. Comes in 2'x4' panels

Minimum order of 64sq ft. Comes in 2'x4' panels

  • Reaction score 0
  • Comments 0
1.5\" resin-coated contourable balsa from Composites One.

1.5\" resin-coated contourable balsa from Composites One.

  • Reaction score 0
  • Comments 0
Demo complete, heater and fan in place, balsa core cut and ready to lay in.

Demo complete, heater and fan in place, balsa core cut and ready to lay in.

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
Core balsa is 1.5 inches thick.

Core balsa is 1.5 inches thick.

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
Probably 90% of what I've exposed and removed was soaked, rot ranged from severe/mush to slightly discolored but with a good bond to the fiberglass.

Probably 90% of what I've exposed and removed was soaked, rot ranged from severe/mush to slightly discolored but with a good bond to the fiberglass.

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
Starting to remove all of the exposed core

Starting to remove all of the exposed core

  • Reaction score 0
  • Comments 0
Rot surrounding old rivet holes

Rot surrounding old rivet holes

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
The black edge-cover on the side panel was glued to the hull - a few taps on a pry-bar with a hammer broke it free.

The black edge-cover on the side panel was glued to the hull - a few taps on a pry-bar with a hammer broke it free.

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0

  • Reaction score 0
  • Comments 0
More empty rivet holes with obvious core-rot. Probably have been open for years.

More empty rivet holes with obvious core-rot. Probably have been open for years.

  • Reaction score 0
  • Comments 0
Rivets fastening side panel to deck have almost all corroded and fallen out, leaving open holes to the balsa core.

Rivets fastening side panel to deck have almost all corroded and fallen out, leaving open holes to the balsa core.

  • Reaction score 0
  • Comments 0
D

Rivets fastening side panel to deck have almost all corroded and fallen out, leaving open holes to the balsa core.

  • Items 23
  • Album owner d&linAK
  • Date created
There are no comments to display.

Album information

Category
Deck repair/replacement
Album owner
d&linAK
Date created
Item count
23
View count
1,530
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

D

d&linAK

Media items
46
Albums
4
Can view media items
Inherited from category
Can add media items
Album owner only

Share this album

Back
Top