Prev
8. New exhaust discharge, as per Wallas installation instructions.
Next
Prev
2. Wallas exhaust clamshell
10. Exhaust over flow collection bottle. I still get a little water getting past the heat resistant silicone used in the flex pipe to solid pipe connections, and possibly the flex pipe itself. I keep a synthetic towel folded under the cabinet drawer box, shown in this picture. The amount of water that collects in the towel and the bottle are minimal and now acceptable to me. It now takes pretty rough weather conditions to have salt water collect in these areas.
9. New exhaust installation with a coiled copper tube which leads to a collection bottle for any salt water that may get to this point.
8. New exhaust discharge, as per Wallas installation instructions.
1. Original exhaust vent on the outside of the hull.
7. You can see the sooty water stains from water flowing down the side of the hull and into the bildge. In heavy weather, I was also concerned about salt water penetrating the wallas stove.
6. The original exhaust connection leaked an intolerable amount of water into the bildge and kept getting everything stored under the sink wet all the time.
Next
R

8. New exhaust discharge, as per Wallas installation instructions.

8. New exhaust discharge, as per Wallas installation instructions.
Click to expand...
There are no comments to display.

Media information

Category
Wallas stove leaky exhaust repairs on "Pacific Wanderer" a 2009 23 Venture.
Album
1. Original exhaust vent on the outside of the hull.
Added by
ross_ballard
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top