Prev
6 holes filled polished new decal port side
Next
Prev
Port transom 4 screws removed holes patched using a Spectrum patch kit. If I had to do it over I'd not use a patch kit. Getting the catalyst right takes experimentation. Kit doesn't leave room for experimentation. Quart of blue is on order....
6 holes filled polished new decal port side
Starboard glasswork done and new decal
11 transom screws or former screws sealed with adhesive sealant were removed, properly filled, and a gelcoat patch kit applied. Color matching of the kit was definitely off.
Starboard polished ready for decal
Starboard gelcoat was applied but did not fully fill the depressions. Cleaned with acetone and applied a second coat. After sanding level a few air bubbles showed so a third very light "wash" coat filled the bubbles and it ended up a perfect color match.
Starboard glasswork ready for gelcoat
Next
S

6 holes filled polished new decal port side

  • Media owner Sneaks
  • Date added
6 holes filled polished new decal port side
Click to expand...
There are no comments to display.

Media information

Category
Gelcoat repairs
Album
11 transom screws or former screws sealed with adhesive sealant were removed, properly filled, and a gelcoat patch kit applied. Color matching of the kit was definitely off.
Added by
Sneaks
Date added
View count
2
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top