Prev
2x4s, a little glue, some self-tapping deck screws, left over cutting table material, and a few coats of spar Varathane.
Next
Prev
Used a couple of machined screws as push-pines to hold the top on so it dosen?t fall off when the lid is picked up.
Looked around a long time before deciding on this Rubbermaid cooler. Not shown here but it comes with 3 freezer packs that act as dividers and 4 freezer packs that attach to the lid. Also called Rubbermaid a got the stainless steal hardware upgrade. About $150 for everything.
Nice snug fit
2x4s, a little glue, some self-tapping deck screws, left over cutting table material, and a few coats of spar Varathane.
Jody almost gave me the rod on this one. The harpoon made short work of this guy when he broke the surface.
Old cutting table and cooler off the 22 a bit on the small size for 130lb butt.
Next
B

2x4s, a little glue, some self-tapping deck screws, left over cutting table material, and a few coats of spar Varathane.

  • Media owner breausaw
  • Date added
2x4s, a little glue, some self-tapping deck screws, left over cutting table material, and a few coats of spar Varathane.
Click to expand...
There are no comments to display.

Media information

Category
New cooler/cutting table
Album
Old cutting table and cooler off the 22 a bit on the small size for 130lb butt.
Added by
breausaw
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top