Prev
1/8 inch pilot holes are drilled first from underside, then 1/4 inch holes.
Next
Prev
Recommended bolt pattern doesn't seem to interfere with the anode/trim device.
Instructions don't really tell you fore/aft placement, I moved mine aft a little to provide good clearance around lower unit vent plug.
Both installed, complete.
1/8 inch pilot holes are drilled first from underside, then 1/4 inch holes.
Clamped on each side, drilling holes, notice bag over prop spindle to avoid shavings.
Next
D

1/8 inch pilot holes are drilled first from underside, then 1/4 inch holes.

  • Media owner Dora~Jean
  • Date added
1/8 inch pilot holes are drilled first from underside, then 1/4 inch holes.
Click to expand...
There are no comments to display.

Media information

Category
Permatrims (Feb 2008)
Album
Clamped on each side, drilling holes, notice bag over prop spindle to avoid shavings.
Added by
Dora~Jean
Date added
View count
6
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top