Prev
05 I very carefully cut out the drawer face (that vent was there already)
Next
Prev
08 this has come in really handy on the boat
07 I had to prop up the tank to get to those pesky L-brakets (I also enlarged the access hole on the bottom left corner of the panel for better hose clamp access
06 the drawer is deeper at the front than at the back because of the shape of the tank
05 I very carefully cut out the drawer face (that vent was there already)
04 I cleaned the sole under the tank
03 there was no signs of leaks so I didn\'t bother to undercut and epoxy the screw holes for the L-brackets in the sole - I did however put a daub of life-calk in the hole before reinstall for good measur
02 getting to the L-bracket scews that hold the panel to the sole was the most difficult part of this project
Next
S

05 I very carefully cut out the drawer face (that vent was there already)

  • Media owner sebastien
  • Date added
05 I very carefully cut out the drawer face (that vent was there already)
Click to expand...
There are no comments to display.

Media information

Category
drawer above water tank
Album
01 I took off the front panel
Added by
sebastien
Date added
View count
4
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top