trim tab

jennykatz · Posted: Thu Apr 20, 2006 9:02 pm Post subject: trim tab

what a diff the Lenco tabs make. I can now plane off quicker it keeps the boat level its Great.The problem we had was we had to move the swim platform there's always something . Im planning on some upgrades with 110 shore power and some new canvas I will post picture when I get them . Also a big thanks to MIke Taylor who helped me every step of the way and then some . MY advice get the tabs worth every penny

Anne-B · Posted: Fri Apr 21, 2006 2:49 pm Post subject: Lenco tabs

jennykatz

What type of Lenco tabs did you use? Edge mount or standard? Did the top of the drive cyl. mount under the splash well or over? Will the top of the drive cyl. on the 12x12 Lencos mount under the splashwell? I would like to keep the wires out the motorwell.

jennykatz · Posted: Sun Apr 23, 2006 9:18 am Post subject:

I bought the lenco 9by12 thats 12in skrewed to the boat and 9in sticking out as a tab .I used the standard . you need 15in to install these .the others you need 11in or 14in depending on what you get .go to marine store and look at the box it will show you on the box how many inches. you need . the standard 9by12 wire will come into the motor well so you must reroute the cable(wire) down a few inches for a better install i hope this clears it up call me if you want 239-269-9537 jim