| View previous topic :: View next topic |
| Author |
Message |
Pearl
Joined: 05 Nov 2016
Posts: 15
City/Region: Riverdale
State or Province: ND
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: Prop'r Cson
Photos: Prop'r Cson
|
 Posted: Wed Sep 28, 2022 3:11 pm Post subject: Wiring Wallas Stove |
 |
|
I am replacing the electric/butane stove in my 2007 25' Cruiser with a Wallas stove/heater and noticed two sets of unused wires, the first cable is red and black and the other cable is green and black. There is no power to either one of them. I would like to use either cable for powering the Wallas stove. Any ideas regarding these two cables would be a great help.
https://drive.google.com/file/d/1_oy1xi8MpQpgQb3ZVTx7MKWG2DXeO2VA/view?usp=sharing
_________________
Eric & Bernie
2010 Ranger Tug 21EC - Sold
2007 C-Dory 25 Cruiser
Home Port: Pick City, ND |
|
| Back to top |
|
 |
starcrafttom
Joined: 07 Nov 2003
Posts: 7932
City/Region: marysville
State or Province: WA
C-Dory Year: 1984
C-Dory Model: 27 Cruiser
Vessel Name: to be decided later
Photos: Susan E
|
|
| Back to top |
|
|
thataway
Joined: 02 Nov 2003
Posts: 21354
City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
| Posted: Wed Sep 28, 2022 9:22 pm Post subject: |
|
|
My 2007 25 also had a similar set of unused wires. I did not trace them out--but there was a corresponding set back by the battery. The Wallas is supposed to be hooked up to the battery, which is not consistent with ABYC standards. You want to have good clean 12.6 volt power for it to start the stove. You could put a signal generator on those wires and trace them out--I would not be surprised if you found that they terminated near the main circuit breaker or the battery aft of the cockpit.
_________________
Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
| Back to top |
|
|
tsturm
Joined: 01 Nov 2003
Posts: 1164
City/Region: Soldotna
State or Province: AK
C-Dory Year: 2003
C-Dory Model: 25 Cruiser
Vessel Name: JMR TOO
Photos: JMR-TOO
|
| Posted: Sun Oct 02, 2022 9:35 am Post subject: Re: Wiring Wallas Stove |
|
|
| Pearl wrote: | I am replacing the electric/butane stove in my 2007 25' Cruiser with a Wallas stove/heater and noticed two sets of unused wires, the first cable is red and black and the other cable is green and black. There is no power to either one of them. I would like to use either cable for powering the Wallas stove. Any ideas regarding these two cables would be a great help.
https://drive.google.com/file/d/1_oy1xi8MpQpgQb3ZVTx7MKWG2DXeO2VA/view?usp=sharing |
The wiring needs to be 10awg and direct to the battery with a fuse or circuit breaker near the batt.  |
|
| Back to top |
|
|
|
Search
Private Messages
Profile
Log in
Register
Help
