Patterns for carpeting the v-berth of a 22

starcrafttom

Susan was digging in her sewing room and found the patterns for carpeting the walls and ceiling of a 22 cruiser. If anyone wants them to use and then pass them on just speak up and we will send them to you. Makes cutting out the material so easy. We were given these by Ruthy and Joe.

R-Matey

kennharriet · Posted: Thu Feb 24, 2022 6:43 pm Post subject:

Would love to have them Tom and would gladly pay shipping. Pam sent

starcrafttom · Posted: Mon Feb 28, 2022 3:55 pm Post subject:

patterns are on the way. let me know when they get there.

kennharriet · Posted: Mon Feb 28, 2022 7:12 pm Post subject:

Thank you Tom. How much do I owe you for shipping?

starcrafttom · Posted: Mon Feb 28, 2022 9:04 pm Post subject:

Sorry Ken I did not mean you. Already sent to another brat that Instant messaged me. but after he is done maybe you can get them from him.

starcrafttom · Posted: Mon Feb 28, 2022 9:06 pm Post subject:

It was Stefan on ssobol

ssobol · Posted: Mon Feb 28, 2022 11:35 pm Post subject:

I'll make them available when I'm done with them.

What kind of carpet was used with these patterns?

Thanks.

starcrafttom · Posted: Tue Mar 01, 2022 1:19 pm Post subject:

I just used a very short nylon carpet. Like you would use in some lake boats for the floor. It was just to keep the moisture off the walls. But first we used them to glue down insulation to the walls. Spray or roll on contact cement worked great. Over size cut everything about a half inch then trim to size after each peice is glued down. Spray the area you are going to place the material. Then spray the material also. Let both dry for about 5 mins or so then place the material. If you only spray one surface it will not stick as well. We got all the insulation put in and let it dry for a day then went back and did the next layer. It was a world of different in moisture, warmth, sound and just not waking from a dead sleep because you rolled over and slapped a cold wet wall with your ass cheek.