CD 22 Transom

SENSEI · Posted: Fri Apr 05, 2013 11:21 am Post subject:

I had to replace the core in Sensei's transom. it was balsa and no ply. it was redone with balsa .

ferret30 · Posted: Fri Apr 05, 2013 11:44 am Post subject:

My 2006 definitely has green foam in the transom.

C-Val · Posted: Fri Apr 05, 2013 1:44 pm Post subject:

Sensei
Your album is very helpful to me as I will probably into redoing mine soon

Question: if you were doing yours again would you remove the inside as you did or would you cut off the outside skin as some others have suggested?

(I was going to replace mine with marine plywood since I am used to working with ply --unless that is a bad idea)

localboy · Posted: Fri Apr 05, 2013 2:18 pm Post subject:

cedarecho · Posted: Sun May 12, 2013 2:36 am Post subject:

I replaced my transom with 2 layers of marine grade plywood.

Captains Cat · Posted: Sun May 12, 2013 7:35 am Post subject:

Got pictures? Hope you mean transom core, pretty sure you do! Others will be very interested in the process! Thanks!

Charlie

cedarecho · Posted: Sun May 12, 2013 1:37 pm Post subject:

I did mean the transom core. I do have pictures posted in Verlyn's album.

thataway · Posted: Sun May 12, 2013 2:15 pm Post subject:

Good choice. It should last more than another 30 years, especially if you sealed the top with epoxy and line any holes with epoxy.

digger · Posted: Sun May 12, 2013 2:40 pm Post subject:

I can hardly wait to see more of The Prairieboy progress on his album. I keep checking, and am glad that there will be some new artwork in the form of boat rebirth coming out of Kentucky. Ron