Search results

  1. C

    Guest multi bank charger

    I have a Guest 3 bank charger 5-5-10 that I assume is original equipment for my boat (2008) and does not support LiFepo4 battery charging. I upgraded my house bank to 2 Lifepo4 and start to AGM, I also have a DC-DC charger from each start battery charging the house bank. I do not feel the need...
  2. IMG 1224

    IMG 1224

    IMG 1224
  3. C

    Webasto Heater Installation

    I installed one on my previous 22 cruiser and did not connect anything to either of the air inlet (combustion and cabin heater). It did warm ups and dry the cabin quite nicely. The 22 had a much tighter available space, and any hose coming down would have encroached in my storage room. In the...
  4. C

    Webasto Heater Installation

    I think you mention something similar earlier but what about running an oversized hose from a dry part of your bilge and connecting the combustion intake to that. That will move the vacuum from the cabin to the bilge. There is no heat going through that so any hose material will be fine up until...
  5. C

    Moving battery bank to galley

    Here some follow up on this project. I ended up placing the start batteries (2X AGM gr 31) and main switches under the aft settee of the dinette. I built a tray behind the drawer and off the floor as high as I could so I’m not really loosing any storage there and it's very easy access. The...
  6. IMG 1254

    IMG 1254

    IMG 1254
  7. IMG 1253

    IMG 1253

    IMG 1253
  8. IMG 1250

    IMG 1250

    IMG 1250
  9. IMG 1249

    IMG 1249

    IMG 1249
  10. IMG 1248

    IMG 1248

    IMG 1248
  11. IMG 1245

    IMG 1245

    IMG 1245
  12. IMG 1244

    IMG 1244

    IMG 1244
  13. IMG 1243

    IMG 1243

    IMG 1243
  14. IMG 1239

    IMG 1239

    IMG 1239
  15. IMG 1237

    IMG 1237

    IMG 1237
  16. C

    Canvas

    I know it wasn’t much of a highjack... Folding flat sound very good, but not the most convenient, especially in the 22 since the middle removable section will interfere with that. In the Tomcat it will be most likely sitting on top of the access hatch which I use frequently. Mine came with a...
  17. C

    Canvas

    Not meaning to highjack this post but it’s somewhat relevant. What is the best way to store the side curtain with clear window when not in use. I’m sure flat is ideal but hard to do in a small boat, leaving folded or roll. I try both way, not sure what is best. Thanks
  18. C

    Canvas

    different folks--different strokes! Very well said, you need to decide what will work best for you, and we all have different priorities and different cruising ground. Here, it rains a lot, and unless you are doing day trip, you will be spending most night at anchor. I only had a top cover on my...
  19. C

    TomCat transducer location?

    I have similar issues with my TC255, but I have not spent much time trying to find the answer, I will certainly working on that this summer, I had much better bottom reading with my 22, completely different system but I’d like to think it is more about the hull design of the tomcat that create...
  20. C

    Canvas

    I have 2 extra attachment for the frame on the gunnel near the cabin bulkhead. I can remove my canvas, fold the frame and move it there so it doesn’t interfere with anything, like while fishing You can see it there strapped against the cabin.
Back
Top