Raymarine Upgrade

Dreamer · Once a C-Brat, always a C-Brat Dreamer- Sold 25 Feb. 2013

I recently installed version 4.29 of the Raymarine Software on my E-80. A few days later, I had the occasion to turn on my Radar. No luck! The screen froze up and the Radar did not transmit. An e-mail to Raymarine resulted in the following message;

"You need to master reset the displays to return the radar to normal operation.
First save your waypoint and routes to a CF card. With the unit off press and hold in the first softkey in while you power up the unit. Continue to hold in the key until the reset is complete."

Hope this saves you Raymarine owners a little time and frustration.

Notayot · Posted: Sun Sep 21, 2008 2:35 am Post subject:

I upgraded our C-80 when the upgrade was issued earlier this summer, and have had no trouble with the radar. We have a couple of hundred miles on the new software and same old 2006 radar (Raymarine Pathfinder 2 kw, 18 inch unit).