Tybo kicker mount

Moldy · Posted: Tue Nov 14, 2006 9:29 pm Post subject: Tybo kicker mount

Does anyone have a finished picture of the kicker mount?

And the mini jacker,is it as clean looking as the Tybo mount?
I would love to see comparisons of them and get any input you guy's have on kicker brackets and how they look and perform on a c-dory 22

Thanks!
Bruce

SeaSpray · Posted: Wed Nov 15, 2006 12:41 am Post subject:

Hi Moldy,

I have the mini Jacker and I think it looks okay. It is a nice unit - just make sure you get it where you want it. I am not sure I did because of the trim tabs. Sorry I don't have any pics.

Steve

Jazzmanic · Posted: Wed Nov 15, 2006 12:54 am Post subject:

Moldy,

We had a Mini-Jacker installed about a year ago for the express purpose of hanging the kicker on the back with trim tabs. Here's a pic. Hope you can make it out, the pics kinda small.

I think it's really solid, looks nice and allows enough room for the kicker. I'm happy with it, the factory did a good job. I believe Les has been using the Mini-Jacker for his installs as well.

Mighty Bite · Posted: Fri Aug 30, 2013 7:06 pm Post subject:

I have a Tyboo designed stainless steel kicker mount that was just fabricated up along with a 10" x10" x2" mounting board. The board is made up of two pieces of 3/4" Decraguard with a 1/2" marine center ply, all of the edge ply is epoxy sealed and the board painted.
Never been mounted on a transom. I was going to use it on my 16', but plans changed and I'm going to go with just the single main. I thought I'd make it available if one of the Brat's is looking for a great bracket.

I'd post some pics, but that is way beyond my pay
grade, but I would e-mail pics to anyone interested.