Gas and water cap seals

[Spiralinguist]

I have a 1992 22’ C Dory. I’ve measured the seals at 1.5” and when I ordered 1.5” replacements, they are too big. Does anyone have a site or place where they have found new seals that fit? The gas seals are overdue for replacement and the water seal is completely absent.

[LesR]

I ordered these from Defender, which fit the gas and water caps on my 25. You may be able to find one that fits at your local hardware store.

https://www.defender.com/product.jsp?id=2034674#

[thataway]

Any hardware store should have these "O" rings. Best to take the old one with you. It is not only the diameter of the ring as it fits into the cap, , but of the cross section of the actual "O" ring--ie 1/8"

Best to get nitrile composition. I like to keep them dressed with a small amount of silicone grease.

[SeaSpray]

I ordered these.

https://www.amazon.com/gp/product/B000FMUVBG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Steve

[localboy]

[localboy]

Large ones: https://www.theoringstore.com/store/index.php?main_page=product_info&cPath=367_23_25&products_id=1208

Buy 10 for less than one from any marine supply I could find. One place wanted $12 for one o-ring.

Small ones are Danco #50. I found them at Ace. Danco supplies plumbing products.

http://www.c-brats.com/modules.php?set_albumName=album3086&op=modload&name=gallery&file=index&include=view_album.php

[ssobol]

[localboy]