View previous topic :: View next topic |
Author |
Message |
jep27
Joined: 28 May 2020 Posts: 25 City/Region: New Haven
State or Province: VT
C-Dory Year: 2007
C-Dory Model: 26 Venture
Vessel Name: Lunasa
Photos: Lunasa
|
Posted: Thu Aug 12, 2021 10:56 pm Post subject: Cockpit Bench Seating |
|
|
After doing a bunch of reading on these forums.. we went ahead and put a bench seating arrangement into the cockpit of our 26' CC/Venture. Thanks for all the information / inputs.
This will fold up, out of the way- set-up as a bench seat.. or lie flat as a bed.
I also got some additional teak - and added a side-shelf and two jump seats.. that also help in increasing the width of the step-in.
Photos in our album.. and high recommendation to work with Mike @ Butler Marine Products in PA.. if there's any interest. The mostly make teak swim platforms -- but was very easy to work with and quality/execution was first-rate.
Any ??, happy to PM
Jeff _________________ jep27 |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20829 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Fri Aug 13, 2021 10:51 am Post subject: |
|
|
Jeff,
Beautiful workmanship and a great addition to the boat. Thanks for sharing.
Did understand that you wrapped the hull? If so how did that work out with Erie Canal and the bags around the fenders?
The boat looks really nice. _________________ Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
Back to top |
|
|
jep27
Joined: 28 May 2020 Posts: 25 City/Region: New Haven
State or Province: VT
C-Dory Year: 2007
C-Dory Model: 26 Venture
Vessel Name: Lunasa
Photos: Lunasa
|
Posted: Fri Aug 13, 2021 11:19 am Post subject: |
|
|
uh-oh.. what'd I do?
The quick answer is that everything worked out very well on the trip, etc.. but, I'd want to understand if 'wrapped the hull' -- raises a concern I didn't consider?
As you know.. it's amateur hour up here.. so I'd certainly welcome any concerns or considerations I may have overlooked?
thanks- Jeff |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20829 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Fri Aug 13, 2021 11:26 am Post subject: |
|
|
Wrap: Some boaters put a vinyl film over the entire hull, like a shrink wrap. It can be graphics or a solid color. It is much cheaper than painting or gel coating...
There was one comment that made me think that you might have done this. If not--the boat looks great anyway! |
|
Back to top |
|
|
jep27
Joined: 28 May 2020 Posts: 25 City/Region: New Haven
State or Province: VT
C-Dory Year: 2007
C-Dory Model: 26 Venture
Vessel Name: Lunasa
Photos: Lunasa
|
Posted: Fri Aug 13, 2021 11:30 am Post subject: |
|
|
aahh... so if you are talking about the hull covering / bottom paint -- we used 'Coppercoat' -- which is a an epoxy paint.. with high-copper content. Low-leach epoxy.. stated to last 10-15year.. and the #1 rated environmental product we could find.
So far so good with the coppercoat.. but again, please clarify that I'm understanding.. or advise if there is another aspect or concern.
Tremendous respect for your experience and perspective.
thx- Jeff |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20829 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Fri Aug 13, 2021 11:35 am Post subject: |
|
|
The topsides (area between the boot stripe or waterline and the deck). of the hull itself-the black part in your case. If you had it done, you would know about it.
We understand about your use of the epoxy/copper bottom paint. How it holds up will be interesting--and I think in your case it will hold up well. |
|
Back to top |
|
|
jep27
Joined: 28 May 2020 Posts: 25 City/Region: New Haven
State or Province: VT
C-Dory Year: 2007
C-Dory Model: 26 Venture
Vessel Name: Lunasa
Photos: Lunasa
|
Posted: Fri Aug 13, 2021 11:51 am Post subject: |
|
|
gotcha..
that was that way when I got it.. and I was told it had been cone as a 'custom color' at manufacture (cape cruiser).-- so that's original.
I haven't gotten to anything 'aesthetic' -- and probably still a long ways out for doing that type of thing (if ever.. ) -- lots of fun functional things to still address in the coming seasons.
thx- Jeff |
|
Back to top |
|
|
chieftele
Joined: 18 Oct 2013 Posts: 39 City/Region: Placerville
State or Province: CA
C-Dory Year: 2006
C-Dory Model: 16 Angler
Vessel Name: Rose Bud
Photos: Rose Bud
|
Posted: Fri Aug 13, 2021 10:20 pm Post subject: |
|
|
Really a beautiful job with that seat! Thanks for sharing a great idea. |
|
Back to top |
|
|
|