View previous topic :: View next topic |
Author |
Message |
cmetzenberg
Joined: 04 Jan 2014 Posts: 367 City/Region: Santa Barbara
State or Province: CA
C-Dory Year: 2007
C-Dory Model: 255 Tomcat
Vessel Name: Kanaloa
Photos: Kanaloa
|
Posted: Sun Aug 25, 2019 11:42 pm Post subject: Honda outboard fitting |
|
|
I'm not sure what this thing is called! I'm about to fashion a hose clamp to mine and some silicone. Anyone know the terminology for what this flange the rigging hose fits over? The one on the other engine is wobbly and loose.
[/img]https://photos.app.goo.gl/6hAKUR65xbejsaTR6[/list] _________________ Conrad Metzenberg
07' Tomcat 255 "Kanaloa"
87' Boston Whaler Guardian 17 (BlackFlag, 03-14)
|
|
Back to top |
|
|
ssobol
Joined: 27 Oct 2012 Posts: 3375 City/Region: SW Michigan
State or Province: MI
C-Dory Year: 2008
C-Dory Model: 22 Cruiser
Vessel Name: SoBELLE
Photos: SoBelle
|
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20815 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Mon Aug 26, 2019 9:51 am Post subject: |
|
|
Some call this a "Rigging tube"--so a rigging tube flange--would be the terminology for the flange.
I have a shop manual for the Honda's--and can check that later in the day. _________________ Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
Back to top |
|
|
BrentB
Joined: 15 Jul 2006 Posts: 4419 City/Region: Greenwood
State or Province: IN
Photos: BrentB
|
Posted: Mon Aug 26, 2019 12:49 pm Post subject: |
|
|
Yes it is rigging tube which easy to find but the grommet is specific to outboards. The boat end is common part match to rigging tube diameter. When derigging, I suggest replacing the fuel hose inside the tube if hasn't been replaced recently just to be proactive
For Yamaha , go to https://www.simyamaha.com/RIGGING_COMPONENTS_s/1813.htm
Dr Bob will post the Honda info _________________ Brent Barrett |
|
Back to top |
|
|
BrentB
Joined: 15 Jul 2006 Posts: 4419 City/Region: Greenwood
State or Province: IN
Photos: BrentB
|
Posted: Tue Aug 27, 2019 9:55 am Post subject: |
|
|
Is the flange bad? or tube needs to be threaded into flange? |
|
Back to top |
|
|
cmetzenberg
Joined: 04 Jan 2014 Posts: 367 City/Region: Santa Barbara
State or Province: CA
C-Dory Year: 2007
C-Dory Model: 255 Tomcat
Vessel Name: Kanaloa
Photos: Kanaloa
|
Posted: Wed Aug 28, 2019 10:01 am Post subject: |
|
|
on that engine the corrugated tube has become disconnected from the rigging tube that it should fit over. I see no threads of any sort. I'm going to silicone it and use a hose clamp |
|
Back to top |
|
|
BrentB
Joined: 15 Jul 2006 Posts: 4419 City/Region: Greenwood
State or Province: IN
Photos: BrentB
|
Posted: Wed Aug 28, 2019 12:51 pm Post subject: |
|
|
Rescue tape or other self fusing tape? |
|
Back to top |
|
|
cmetzenberg
Joined: 04 Jan 2014 Posts: 367 City/Region: Santa Barbara
State or Province: CA
C-Dory Year: 2007
C-Dory Model: 255 Tomcat
Vessel Name: Kanaloa
Photos: Kanaloa
|
Posted: Wed Aug 28, 2019 11:26 pm Post subject: |
|
|
BrentB wrote: | Yes it is rigging tube which easy to find but the grommet is specific to outboards. The boat end is common part match to rigging tube diameter. When derigging, I suggest replacing the fuel hose inside the tube if hasn't been replaced recently just to be proactive
For Yamaha , go to https://www.simyamaha.com/RIGGING_COMPONENTS_s/1813.htm
Dr Bob will post the Honda info |
On this fuel hose replacement, I've never done such. How often does this need to be done? My boat is covered so the hoses have very little UV exposure. I see not cracks or signs of deterioration. |
|
Back to top |
|
|
BrentB
Joined: 15 Jul 2006 Posts: 4419 City/Region: Greenwood
State or Province: IN
Photos: BrentB
|
Posted: Fri Aug 30, 2019 12:04 am Post subject: |
|
|
The fuel line is inside the rigging tube and a good time to replace it when derigging items from the motor side for new flange and tube, and inspect throttle cables and electrical wires. It takes a couple hours |
|
Back to top |
|
|
Wefings Dealer
Joined: 29 Nov 2005 Posts: 2086 City/Region: Panhandle
State or Province: FL
Photos: Cruise Ship #4
|
|
Back to top |
|
|
|