View previous topic :: View next topic |
Author |
Message |
amy and karl
Joined: 18 Aug 2006 Posts: 228 City/Region: Graham
State or Province: WA
C-Dory Year: 2007
C-Dory Model: 22 Cruiser
Vessel Name: C-DAISY
Photos: C-DAISY
|
Posted: Sun May 22, 2011 11:04 pm Post subject: Dinghy Rack |
|
|
Just got done rough fitting a dinghy rack for the c-daisy. Thought I would throw up a couple pics to share. Still waiting for the dinghy to be completed.
The tubes are all 1inch heavy wall stainless. They don't bend when I stand on them but they surely would if I was to bounce up and down on them. There is another fitting I can use in the middle if flexing becomes an issue.
The elbows are from marinepartsdepot.com and are good quality for the price. The Mako saddles and Hully Rollers as well as the Taylor Made rail sockets were all bought off ebay. All in all its pretty sturdy so I think it will handle the 128 lbs load.
Karl
|
|
Back to top |
|
|
Aurelia
Joined: 21 Aug 2009 Posts: 2331 City/Region: Gig Harbor
State or Province: WA
Photos: Aurelia
|
Posted: Sun May 22, 2011 11:17 pm Post subject: |
|
|
Carl, is this rack for what i think it's for? _________________ Greg, Cindie & Aven
Gig Harbor
Aurelia - 25 Cruiser sold 2012
Ari - 19 Cruiser sold 2023
currently exploring with "Lia", 17 ft Bullfrog Supersport Pilothouse |
|
Back to top |
|
|
amy and karl
Joined: 18 Aug 2006 Posts: 228 City/Region: Graham
State or Province: WA
C-Dory Year: 2007
C-Dory Model: 22 Cruiser
Vessel Name: C-DAISY
Photos: C-DAISY
|
Posted: Sun May 22, 2011 11:57 pm Post subject: |
|
|
Absolutely Greg! We're going to give a shot. |
|
Back to top |
|
|
JGrider
Joined: 26 Feb 2010 Posts: 93 City/Region: Laplace
State or Province: LA
C-Dory Year: 2006
C-Dory Model: 22 Cruiser
Vessel Name: Jeannie's VOO DOO
Photos: Jeannie’s VOO DOO
|
Posted: Mon May 23, 2011 12:09 am Post subject: Dingy rack |
|
|
Ok Ill bite!
Whats going on the Rack, Is it what I think it is.
John _________________ John & Jeannie Grider
Jeannie's VooDoo
Home port: LaPlace, Louisiana |
|
Back to top |
|
|
Aurelia
Joined: 21 Aug 2009 Posts: 2331 City/Region: Gig Harbor
State or Province: WA
Photos: Aurelia
|
Posted: Mon May 23, 2011 12:14 am Post subject: |
|
|
The keel is much taller than it looks so plan on moving the saddles closer together and also start thinking of ways to raise them higher for clearance. The rollers may work well but again the height will be a factor. Just let me know if I can save you any pain. Do you have the dink on site yet for measurements? |
|
Back to top |
|
|
amy and karl
Joined: 18 Aug 2006 Posts: 228 City/Region: Graham
State or Province: WA
C-Dory Year: 2007
C-Dory Model: 22 Cruiser
Vessel Name: C-DAISY
Photos: C-DAISY
|
Posted: Mon May 23, 2011 12:33 am Post subject: |
|
|
Thanks for the info Greg. I'm going to call David at Pudgy tomorrow and see where we are at. Should have the boat in the next two or three weeks. Maybe we could make a run toward Port Orchard and see what will work?
Karl |
|
Back to top |
|
|
starcrafttom
Joined: 07 Nov 2003 Posts: 7896 City/Region: marysville
State or Province: WA
C-Dory Year: 1984
C-Dory Model: 27 Cruiser
Vessel Name: to be decided later
Photos: Susan E
|
Posted: Mon May 23, 2011 1:10 am Post subject: |
|
|
what does a pudgy weight? and how are you going to get it up on the doey in the first place? going for a over the bow or over the side? _________________ Thomas J Elliott
http://tomsfishinggear.blogspot.com/ |
|
Back to top |
|
|
amy and karl
Joined: 18 Aug 2006 Posts: 228 City/Region: Graham
State or Province: WA
C-Dory Year: 2007
C-Dory Model: 22 Cruiser
Vessel Name: C-DAISY
Photos: C-DAISY
|
Posted: Mon May 23, 2011 5:28 am Post subject: |
|
|
A pudgy weighs in at 128lbs. For now the plan is,just like the inflatable, to bring it up over the side of the bow. If that proves to difficult we'll go with a garhauer lifting davit. Already made a mounting bracket out of 3/8" stainless angle iron(316) so we can mount a garhauer high enough to lift the pudgy off the rack. |
|
Back to top |
|
|
Aurelia
Joined: 21 Aug 2009 Posts: 2331 City/Region: Gig Harbor
State or Province: WA
Photos: Aurelia
|
Posted: Mon May 23, 2011 10:10 am Post subject: |
|
|
Sent you a PM with some contact details. |
|
Back to top |
|
|
hardee
Joined: 30 Oct 2006 Posts: 12633 City/Region: Sequim
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 22 Cruiser
Vessel Name: Sleepy-C
Photos: SleepyC
|
Posted: Wed May 25, 2011 2:59 am Post subject: |
|
|
Karl.
Cool I really hope it works well for you. You should be the envy of the whole fleet..
I may need to copy the rack, at least one section, for use as the bow mount for my inflatable. Do you have a parts list? I am looking at only needing one cross bar because the other cross bar is going to be part of an arch system that will come up from the splash well.
Thanks for posting that and congratulations on your impecable dingy choice.
Harvey
SleepyC _________________ Though in our sleep we are not conscious of our activity or surroundings, we should not, in our wakefulness, be unconscious of our sleep. |
|
Back to top |
|
|
amy and karl
Joined: 18 Aug 2006 Posts: 228 City/Region: Graham
State or Province: WA
C-Dory Year: 2007
C-Dory Model: 22 Cruiser
Vessel Name: C-DAISY
Photos: C-DAISY
|
Posted: Wed May 25, 2011 1:02 pm Post subject: Dinghy Rack |
|
|
Hey Harvey,
Thanks for the compliment. Assuming I can avoid a hernia getting it up there it should work well for us. The Portland Pudgy is a great tender. Not really concerned about the extra weight as we have had alot more than that up there. I'm trying to picture what you have in mind, do you have a sketch?
I got the parts from a few different places.
The rail sockets are produced by Taylor Made products. They make them in two sizes. The ones I used are for 7/8"-1" rails and accept a 1" rail out the top end. They are actually flagpole mounts. The tubing is all 1" heavy wall stainless (1/16" wall thickness). The elbows are also 1" stainless. Lastly, the Yakima Hully Rollers and Mako Saddles were purchased from ebay.
I Wanted the rack to be easily removable so we could still use our mooring cover without modifying it.
http://www.wholesalemarine.com/p/NAT-973/Stainless+Steel+Rail+Mount+Flag+Pole+Socket.html
http://www.defender.com/ProductDisplay?id=1152848
http://marinepartdepot.com/ststel90deg1.html
Happy Boating,
karl |
|
Back to top |
|
|
amy and karl
Joined: 18 Aug 2006 Posts: 228 City/Region: Graham
State or Province: WA
C-Dory Year: 2007
C-Dory Model: 22 Cruiser
Vessel Name: C-DAISY
Photos: C-DAISY
|
Posted: Sat Sep 03, 2011 11:55 pm Post subject: |
|
|
Well,
we were able to get it up on top but, it just isn't going to work with the garhauer. So the garhauer will be deployed as the kicker lift between the C-dory and the Pudgy. And the Pudgy will be towed for now.
karl
|
|
Back to top |
|
|
Captains Cat
Joined: 03 Nov 2003 Posts: 7313 City/Region: Cod Creek>Potomac River>Chesapeake Bay
State or Province: VA
C-Dory Year: 2005
C-Dory Model: 22 Cruiser
Vessel Name: Captain's Choice II
Photos: Captain's Cat
|
Posted: Sun Sep 04, 2011 8:00 am Post subject: |
|
|
Wow! If you do keep it up there, make sure the drain plug is out in any kind of rain storm! If not, that'll be one hexx of a lot of high weight!
Very cool picture!!
Charlie _________________ CHARLIE and PENNY CBRAT #100
Captain's Cat II 2005 22 Cruiser
Thataway (2006 TC255 - Sold Aug 2013)
Captain's Cat (2006 TC255 - Sold January 2012)
Captain's Kitten (1995 CD 16 Angler- Sold June 2010)
Captain's Choice (1994 CD 22 Cruiser- Sold Jun 2007)
Potomac River/Chesapeake Bay
K4KBA |
|
Back to top |
|
|
hardee
Joined: 30 Oct 2006 Posts: 12633 City/Region: Sequim
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 22 Cruiser
Vessel Name: Sleepy-C
Photos: SleepyC
|
Posted: Tue Sep 06, 2011 6:15 pm Post subject: |
|
|
Captains Cat wrote: | Wow! If you do keep it up there, make sure the drain plug is out in any kind of rain storm! If not, that'll be one hexx of a lot of high weight!
Very cool picture!!
Charlie |
Charlie, The Portland Pudy is self bailing so he can leave the plug out all the time. WOW, it sure looks big on top of the 22 though doesn't it?
Harvey
SleepyC |
|
Back to top |
|
|
hardee
Joined: 30 Oct 2006 Posts: 12633 City/Region: Sequim
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 22 Cruiser
Vessel Name: Sleepy-C
Photos: SleepyC
|
Posted: Tue Sep 06, 2011 6:18 pm Post subject: |
|
|
Karl,
Cool. but it sure looks B I G up there. Hope to see you guys at Sequim CBGT next week. My rack is half done, the aft half and the Wolvarine is up there now.
Harvey
SleepyC |
|
Back to top |
|
|
|