| View previous topic :: View next topic |
| Author |
Message |
Rwinemaker
Joined: 14 Oct 2009
Posts: 15
City/Region: Sandy
State or Province: OR
C-Dory Year: 2008
C-Dory Model: 22 Cruiser
Vessel Name: Lobo
|
 Posted: Sun Oct 18, 2009 12:23 pm Post subject: New Member 1st Post |
 |
|
Hi Everyone,
I'm Russ, my wife, Jean, and I just bought a 2008 22' Cruiser. I'm amazed at the volume and impressive content some of you have shared with the group. I can see quite a bit of engineering time went into these projects. Good ole american ingenuity at its best. I see many custom racks, shelves, curtains and such fastened in some way to the bulkhead or roof. I'm hesitant to drill my 1st hole anywhere. How are these things attached? It doesn't look like there is enough thickness to attach screws. Are some of the attachments using thru-bolt? I haven't been in the water yet but look forward to the day. Thanks for any assistance you con provide. |
|
| Back to top |
|
 |
Dreamer
Joined: 01 Jan 2006
Posts: 1766
City/Region: Really Sunny SaddleBrooke
State or Province: AZ
Photos: Dreamer
|
| Posted: Sun Oct 18, 2009 1:56 pm Post subject: |
|
|
Hi Russ & Jean,
Congrats on the new boat and welcome to the C-Brats.
Regarding your question, I try to use thickened epoxy to attach things to a side wall as it is only 1/4-3/8" thick. The roof on the TC is cored so I can use 1/2" screws in most places.
I have seen some through bolting in the roof on other models. Properly sealed, that shouldn't be a problem other than esthetics.
There are lots of albums to study and a PM to the owners will usually get an answer on their methods in short order.
_________________
Roger
Once a C-Brat, always a C-Brat
Dreamer- Sold 25 Feb. 2013 |
|
| Back to top |
|
|
hardee
Joined: 30 Oct 2006
Posts: 12637
City/Region: Sequim
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 22 Cruiser
Vessel Name: Sleepy-C
Photos: SleepyC
|
| Posted: Sun Oct 18, 2009 2:23 pm Post subject: several new owners in the Portland area |
|
|
Russ and Jean, Welcome and congrats on the new boat. It should provide many hours of comfortable pleasure. you are living in a beautiful area, and lots of great boating opportunities close. Enjoy and hope we get to cross wakes some time. (Plan now for the fall C-Brat Get Together CBGT at Sequim Bay State Park next September.)
Lots of good company here. Ask Tyboo or DaNag for a photo album, and they will set it up, then you can show off your boat, projects and trips.
Looks like there are several new owners in the Portland area. Maybe time for a Portland CBGT is coming.
Harvey
SleepyC 
_________________
Though in our sleep we are not conscious of our activity or surroundings, we should not, in our wakefulness, be unconscious of our sleep. |
|
| Back to top |
|
|
El and Bill
Joined: 08 Nov 2003
Posts: 3200
City/Region: Lakewood, CO
State or Province: CO
C-Dory Year: 2000
C-Dory Model: 22 Cruiser
Vessel Name: Halcyon
Photos: Halcyon
|
| Posted: Sun Oct 18, 2009 2:50 pm Post subject: |
|
|
Russ and Jean -
Welcome and congrats on the new 'member' of your family. I'm curious - are you folks wine makers? Whether you are or not, you are welcome to the Brat's pub.
_________________
El and Bill (former live-aboards)
Halcyon 2000 CD 22 Bought 2000 Sold 2012
http://cruisingamerica-halcyondays.com/ |
|
| Back to top |
|
|
Rwinemaker
Joined: 14 Oct 2009
Posts: 15
City/Region: Sandy
State or Province: OR
C-Dory Year: 2008
C-Dory Model: 22 Cruiser
Vessel Name: Lobo
|
| Posted: Sun Oct 18, 2009 6:41 pm Post subject: re; New Member... |
|
|
Thanks all for the welcome and information, we do appreciate it. Yes, we do make wine and find it to be a fun hobby. I like to try new recipes and when we find one we like try to repeat it. Good fruit, cleanliness and process control are key.
I have Garmin electronics on order and anxiously wait the delivery. I've read several posts on the sump well on the 22' CD some say that area is void of balsa. I plan to use an in hull transducer because we have twin 40 Hondas and I didn't think there is room for a transom mount.
We have two boats at our house right now which I'm sure the neighbors are thrilled about. So, if you know anyone in the Portland area looking for a real nice 2002 17' Arima Sea Ranger with lots of extras let me know. |
|
| Back to top |
|
|
thataway
Joined: 02 Nov 2003
Posts: 21512
City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
| Posted: Sun Oct 18, 2009 7:07 pm Post subject: |
|
|
Welcome aboard, and congratulations! I agree with Roger, about using epoxy to fasten blocks for attatchments. I have used a combination of 5 minute, in several places, and regular, thickened with cabasol, which kicks off to get the real strength. Some folks have used 5200 for adhesion of blocks.
Be careful of the roof. Various boats have core in different areas. Some have core in the center, some on the sides. Not sure if any have core on both the center piece and outer sides of the roof.
I have also attatched items using screws in the window frames--replacing the screw with a slightly longer one, which holds a curtain snap etc.
Spend time in the archives, and look at the various poster's albums, you will get a lot of idea, since many of the projects are covered in detail.
_________________
Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
| Back to top |
|
|
Doryman
Joined: 03 Oct 2006
Posts: 3807
City/Region: Anacortes
State or Province: WA
C-Dory Year: 2006
C-Dory Model: 255 Tomcat
Vessel Name: Lori Ann
Photos: Lori Ann
|
| Posted: Sun Oct 18, 2009 10:25 pm Post subject: Re: re; New Member... |
|
|
| Rwinemaker wrote: | | I plan to use an in hull transducer because we have twin 40 Hondas and I didn't think there is room for a transom mount. |
My 22, which also has twin Honda 40s, came with not one but two transom-mounted transducers! I have only heard of shoot-through transducers on Tom Cats and no in-hull installations on any C-Dory. Not to say it can't be done, but I would suggest asking around here about transom mounts before going to the expense, etc. of an in-hull unit.
Warren
_________________
Doryman
M/V Lori Ann
TomCat 255, Hull #55, 150 Yamahas
Anacortes, WA
 |
|
| Back to top |
|
|
Ananda
Joined: 13 Jul 2009
Posts: 68
City/Region: Portland
State or Province: OR
Photos: Honu
|
| Posted: Sun Oct 18, 2009 11:02 pm Post subject: Re: re; New Member... |
|
|
Welcome to the Portland-area community of C-Doryans! There are a few of us around here. Maybe we will have to arrange a Get-together down the road.
| Rwinemaker wrote: | | We have two boats at our house right now which I'm sure the neighbors are thrilled about. So, if you know anyone in the Portland area looking for a real nice 2002 17' Arima Sea Ranger with lots of extras let me know. |
Had to chuckle at your quote above. The neighbors near boat lovers must be a tolerant bunch, for sure. Rather than get rid of any, I thought you might be interested in my solution... grow a tall hedge of laurel, put a gate in, and hide your boat(s) behind it. I get to keep all the boats and the neighbors don't have to deal with it! Just joking... lucky for me, the hedge was here when I moved in. But now, they all have to wonder what's hiding behind the gate! 
_________________
Kathleen
of Honu, the C-Turtle
2008 22 Cruiser
Sold 2013
 Not all those who wander are lost. -- J.R.R. Tolkien |
|
| Back to top |
|
|
Rwinemaker
Joined: 14 Oct 2009
Posts: 15
City/Region: Sandy
State or Province: OR
C-Dory Year: 2008
C-Dory Model: 22 Cruiser
Vessel Name: Lobo
|
| Posted: Sun Oct 18, 2009 11:05 pm Post subject: Air Mar Instructions |
|
|
| Thanks for your response Warren. When I read the Air Mar transom mount instruction it recommended the starboard side of the motor. I have trim tabs right in that space. The instruction didn't say you could mount between two engines it stated the starboard side of the motor due to prop interference. Where are yours mounted relative to the center line and the outboards? |
|
| Back to top |
|
|
Doryman
Joined: 03 Oct 2006
Posts: 3807
City/Region: Anacortes
State or Province: WA
C-Dory Year: 2006
C-Dory Model: 255 Tomcat
Vessel Name: Lori Ann
Photos: Lori Ann
|
| Posted: Mon Oct 19, 2009 1:52 am Post subject: Re: Air Mar Instructions |
|
|
| Rwinemaker wrote: | | Thanks for your response Warren. When I read the Air Mar transom mount instruction it recommended the starboard side of the motor. I have trim tabs right in that space. The instruction didn't say you could mount between two engines it stated the starboard side of the motor due to prop interference. Where are yours mounted relative to the center line and the outboards? |
That is a good question because I am going to be installing Bennett Trim Tabs soon and I don't know how that will affect the transducers. But I know there are several guys running 40s and Bennetts that have transducers as well. Hopefully they will see this thread and comment.
Warren |
|
| Back to top |
|
|
Don and Brenda
Joined: 22 Feb 2009
Posts: 588
City/Region: Camano Island, Wa
State or Province: WA
C-Dory Year: 2011
C-Dory Model: R-27 Tug
Photos: C-Quest
|
| Posted: Mon Oct 19, 2009 9:40 am Post subject: |
|
|
| I have twin Suzuki's and the Bennett trim tabs. I have a spped sensor and a transducer mounted between the motors, and it works just fine. The boat is not near me to get a measurement, however I believe the transducer is just right of the center line. |
|
| Back to top |
|
|
Fishhawk
Joined: 18 Mar 2007
Posts: 245
City/Region: Bon Secour
State or Province: AL
C-Dory Year: 2006
C-Dory Model: 22 Cruiser
Vessel Name: Osprey
Photos: Osprey
|
| Posted: Mon Oct 19, 2009 10:19 am Post subject: |
|
|
Rwinemaker,
Like yours, our boat has twin 40 Hondas. It also has Bennett trim tabs. Both the transducer and speed sensor are mounted on the back edge of the starboard trim tab. No holes in the boat at all and it works just fine. I recommend that method of mounting. It's in the water right now or I would take a pic for you.
We'll be pulling her out later this week to attend the 4th Annual Gulf Coast Gathering. If you would like I will take a pic of it then and post in our album.
Good luck with your boat and welcome aboard.
Capt Dan
_________________
"We intend to alleviate global warming's effects of raising ocean water levels by removing enough fish to counteract it all! "
 |
|
| Back to top |
|
|
CAVU
Joined: 02 Nov 2003
Posts: 665
City/Region: Spokane
State or Province: WA
C-Dory Year: 2002
C-Dory Model: 22 Cruiser
Vessel Name: CAVU
Photos: CAVU
|
| Posted: Mon Oct 19, 2009 10:35 am Post subject: |
|
|
Works well installed between the motors.
_________________
Ken Trease
22 CD Cruiser, CAVU
Twin 40HP Hondas |
|
| Back to top |
|
|
|
Search
Private Messages
Profile
Log in
Register
Help
