View previous topic :: View next topic |
Author |
Message |
marco422
Joined: 25 Sep 2008 Posts: 103 City/Region: Salt Spring Island
State or Province: BC
C-Dory Year: 2007
C-Dory Model: 16 Cruiser
Vessel Name: Gaiasika
Photos: Gaiasika
|
Posted: Wed Jul 22, 2009 4:28 pm Post subject: 16 Cruiser Overhead Hatch |
|
|
I am thinking of installing an overhead hatch centered in the cabin roof of my 16 Cruiser to let in more light and enable me to stick my head through for piloting (I am 6'4", so I would be able to see easily). I was going to use an 19" Bowmar identical to the forward hatch. Does anyone have any experience with this type of installation, or cautions about such a project?
Thanks. |
|
Back to top |
|
 |
starcrafttom
Joined: 07 Nov 2003 Posts: 7932 City/Region: marysville
State or Province: WA
C-Dory Year: 1984
C-Dory Model: 27 Cruiser
Vessel Name: to be decided later
Photos: Susan E
|
Posted: Wed Jul 22, 2009 4:49 pm Post subject: |
|
|
Have a look at the Armia line of boats. The hard top has some pretty neat hatches for standing up thru when driving. Dont know who supplies their hatches. _________________ Thomas J Elliott
http://tomsfishinggear.blogspot.com/ |
|
Back to top |
|
 |
south_ridge
Joined: 10 May 2008 Posts: 4 City/Region: New Bern
State or Province: NC
C-Dory Year: 2005
C-Dory Model: 25 Cruiser
Vessel Name: C-Dory
|
Posted: Wed Jul 22, 2009 5:09 pm Post subject: Rooftop hatch on 25 Cruiser |
|
|
In June 2009 we put in a 21 inch Bomar hatch on the roof of the C-Dory same as seen on berth area. Also added portholes in berth.
Some of the problems you can find is that the roof is not of even thickness and has a curvature so will require starboard and glassing to seal the hatch.
Now that the job is done it is wonderful. Much better air circulation without center front window open. Also allows for air-conditioner when needed or 21 inch fan that circulates air well at night.
Have found there is solar heat with roof top hatch closed. Use reflective shade as needed. This winter this will be a plus.
Mobile East Marine did the work for me and did a fine job.
South_Ridge.
25 Cruiser |
|
Back to top |
|
 |
Wefings Dealer
Joined: 29 Nov 2005 Posts: 2086 City/Region: Panhandle
State or Province: FL
Photos: Cruise Ship #4
|
Posted: Wed Jul 22, 2009 5:43 pm Post subject: |
|
|
The Arima hatches are molded in at the factory FYI . Check out the Jim Black Hatches also . Thats what Ranger Tugs and many boat builders use for roof ventilation .
Marc _________________ Wefings Marine Website
Since 1909 |
|
Back to top |
|
 |
DoryLvr
Joined: 05 Feb 2009 Posts: 290 City/Region: Cape Charles
State or Province: VA
C-Dory Year: 2003
C-Dory Model: 16 Cruiser
Vessel Name: Litl' Tug
Photos: Litl' Tug
|
Posted: Wed Jul 22, 2009 5:47 pm Post subject: |
|
|
I love the idea and would love to see photos and hear about pros and cons when you are finished. _________________ Tivo Romero, CWO2, USCG (Ret)
DoryLvr
16' Cruiser - Litl' Tug (SOLD)
"The art of seamanship is never allowing yourself to get in a situation where you have to know anything about the subject." |
|
Back to top |
|
 |
marco422
Joined: 25 Sep 2008 Posts: 103 City/Region: Salt Spring Island
State or Province: BC
C-Dory Year: 2007
C-Dory Model: 16 Cruiser
Vessel Name: Gaiasika
Photos: Gaiasika
|
|
Back to top |
|
 |
|