Electric Head Removal

Byrdman · Posted: Thu Nov 04, 2004 1:53 pm Post subject: Electric Head Removal

Looks as if I will need to remove the electric pump on the base/backside of the electrick head on my boat... Has anyone been there? Can not reach the 4 screws that holds the motor to the back side on the head, so it looks like another options would be to: remove the 2 bolts that hold it to the floor of the boat, lifting the entire head out then take the motor off.
I think this would be OK due to a real one in the house you take those out, put a new wax ring in and screw back in... Are there any tricks to this or is it just that simple too?
Thanks!
Byrdman

Byrdman · Posted: Sat Nov 06, 2004 2:31 pm Post subject:

was hoping for a fax from Buck @ C-Dory on head with the schematic... but guess he got out of the office prior to my return message getting to him. 334-213-7721FAX.. The 2 holes on the floor look the easiest to get out... but want to limit surprises.
Byrdman