View previous topic :: View next topic |
Author |
Message |
AK Angler
Joined: 18 Nov 2003 Posts: 327 City/Region: South Central
State or Province: AK
C-Dory Year: 2007
C-Dory Model: 26 Venture
Vessel Name: Rod Holder
Photos: Rod Holder
|
Posted: Thu Sep 23, 2004 11:55 pm Post subject: Proper Drain Plug Techniques... |
|
|
A friend and I were discussing my fuel tank situation when a question about the drain plug (in the transom... not the fuel tank) came up. I don't think I've ever heard any opinions about it so I thought I'd ask here.
How is the drain plug supposed to be inserted?
*From the outside,
*From the inside,
*Or, it doesn't matter, as long as you put it in...
I ask because, with my tank configuration the way it is/was, I gave up on putting the plug in on the inside and started putting it in from the outside. Does it matter? _________________ -Rod
89CD16A- The Navicula has been sold... |
|
Back to top |
|
|
Anita Marie
Joined: 01 Nov 2003 Posts: 826 City/Region: Oak Harbor
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 25 Cruiser
Vessel Name: Anita Marie
Photos: Anita Marie and Little Buddy
|
Posted: Fri Sep 24, 2004 12:23 am Post subject: |
|
|
Rod, the one thing I would be concerned about is if the plug started to leak and needed to be tightened it would be a lot harder to do from the outside. |
|
Back to top |
|
|
Sea Wolf
Joined: 01 Nov 2003 Posts: 8650 City/Region: Redding
State or Province: CA
C-Dory Year: 1987
C-Dory Model: 22 Cruiser
Vessel Name: Sea Wolf
Photos: Sea Wolf
|
Posted: Fri Sep 24, 2004 1:49 am Post subject: |
|
|
There's no way you can pull the plug out accidently or have it leak if it's properly seated. In fact, it fits so well that sometimes it takes a fair bit of wrestling with it to get it out to drain the boat when it on the trailer. Putting it in down between the tanks and behind the bilge pump (and 2nd battery in my case) is a job for a two foot 5 inch contortionist of which I am not!
If you like putting the plug in on the inside, perhaps you'd like to put an inspection port in the wall behind the porti-poti and storing a neatly folded 57 piece wardrobe through the 4 inch opening!
I like complicated and challenging projects, and come up with my share of Rube Goldberg designs and Wylie Coyote schemes, but the inside plug insertion seems unnecessarily difficult from the get-go. My $.02 for free and just for fun! Joe. _________________ Sea Wolf, C-Brat #31
Lake Shasta, California
"Most of my money I spent on boats and women. The rest I squandered'. " -Annonymous |
|
Back to top |
|
|
Casey
Joined: 02 Nov 2003 Posts: 1094 City/Region: The Villages(FL)
State or Province: FL
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: "Dessert 1st"
Photos: Dessert 1st
|
Posted: Fri Sep 24, 2004 5:17 am Post subject: Bilge Plugged from Outside... |
|
|
I have always inserted the bilge plug from the outside....
Come to think of it, Naknek is the only boat I've owned (other than a skiff) where putting the bilge plug in from the Inside was even an option. In most others (including our current B/W Montauk) you can't even reach the bilge hole from the inside. With that in mind, doing it from the outside is clearly "ok."
As for leaking - true, if the plug is put in from the outside it would be impossible to adjust it. Then again, I'm not sure I'd want to mess around with the plug from the Inside either while the boat is in the water!
I think an important item is to make sure the bilge plug is clean and the drain hole is clean so the plug can "seat" properly. If the plug or drain hole has become fouled with oil, dirt, fish slime, or whatever, the plug could slide out more easily. I've never known that to happen, but it seems logical.
Last, but not least, make sure the plug fits the drain hole. With the handle-type plug, adjust the nut on the end so the plug fits properly when the handle is cammed into position. I prefer the simple type that twists into position - easier to feel the tension you've created.
Casey
C-Dory Naknek |
|
Back to top |
|
|
Chuck S
Joined: 01 Nov 2003 Posts: 309 City/Region: Cleveland
State or Province: OH
C-Dory Year: 2003
C-Dory Model: 16 Cruiser
Vessel Name: Amelia Anne
Photos: Amelia Anne
|
Posted: Fri Sep 24, 2004 6:47 am Post subject: |
|
|
Our drain plug is always installed from the inside.
If it "falls out" it'll still be in the boat somewhere.
-- Chuck |
|
Back to top |
|
|
C-Hawk
Joined: 02 Nov 2003 Posts: 2146 City/Region: Carpinteria / Channel Islands
State or Province: CA
C-Dory Year: 2008
C-Dory Model: 22 Cruiser
Vessel Name: C-Hawk
Photos: C-Hawk
|
Posted: Fri Sep 24, 2004 9:33 am Post subject: |
|
|
I always install the plug from the outside and put the cam handle in the up position. I also have a spare plug in the cabin to replace the old one as needed or emergencies. _________________ Roger
2002- CD22- "Fishtales" returned to factory 2008
2008- CD22- "C-Hawk" Sold
KJ6VVB
A Brat I am, At sea I be
God is Great, Beer is Good.... and People are Crazy |
|
Back to top |
|
|
Sneaks
Joined: 06 Jun 2004 Posts: 2020 City/Region: San Diego (Encinitas)
State or Province: CA
C-Dory Year: 1993
C-Dory Model: 16 Angler
Vessel Name: C-Brat
Photos: Jenny B and C-Brat
|
Posted: Fri Sep 24, 2004 10:35 am Post subject: |
|
|
Most of my other trailerables were I/O type and installing from the inside wasn't an option. After an unfortunate "incident" with a cam expansion type plug and some floating trash (long wet EXPENSIVE story) I've always thrown cam lever plugs away and replaced them with the screw expansion type. First thing I noticed about the C-22 is that it was possible to insert the plug from the inside.
I'll probably keep my factory furnished cam plug somewhere handy near the stern just in case I get a major senior moment while launching, but otherwise the hole will get plugged doggy style. _________________ Mary & Don Anderson
Brat #483
"Jenny B" 2005 C-22/F75 sold, Oct. 2008
"C-Brat" 1993 C-16 angler/50 hp |
|
Back to top |
|
|
Da Nag
Joined: 24 Oct 2003 Posts: 2820 City/Region: Port Angeles
State or Province: WA
C-Dory Year: 2008
C-Dory Model: 16 Angler
Vessel Name: Taco
Photos: <a>Da Boats</a>
|
Posted: Fri Sep 24, 2004 10:49 am Post subject: |
|
|
Inside, with a spare under the helm foot rest. Also agree on the screw vs. lever type - Bass Pro sells a nice stainless one cheap.
Why inside? Some people misplace things - when you remove it from the inside, you just drop it next to the bilge pump, and you know where it is when you go to put it back in. And if that happens to be after the boat's already in the water, well...it's nice to be able to come up with it quickly.
So I've heard. No personal experience in this area. Really. _________________ Will, C-Brat Nerd |
|
Back to top |
|
|
Jon - CLou
Joined: 02 Nov 2003 Posts: 316 City/Region: Port Angeles
State or Province: WA
C-Dory Year: 1986
C-Dory Model: 22 Angler
Vessel Name: C-Lou
Photos: C-Lou and Pee Wee
|
Posted: Fri Sep 24, 2004 11:07 am Post subject: |
|
|
I use the stainless steel T-handle type and I install them on the outside. I've used both the tee and the lever type and the tee style seems to seal better. I've never had a problem using the tee type but always carry 2 extra plugs in the motor well just in case. If you're on the water for long periods of time, you can always double plug it (inside and outside) for a little peace of mind. |
|
Back to top |
|
|
True Story
Joined: 03 Nov 2003 Posts: 194 City/Region: Snoqualmie
State or Province: WA
C-Dory Year: 2003
C-Dory Model: 22 Cruiser
Vessel Name: True Story
Photos: True Story
|
Posted: Fri Sep 24, 2004 12:03 pm Post subject: |
|
|
Very good question. I should have had enough courage to ask the question two years ago. I've spent plenty of time thinking about this one (particularily when trying to go to sleep on the boat) and agree with Jon's approach.
T-handle plug tightly inserted from the outside and stored when not in use, in the motor well along with a spare. I also keep a spare stored inside, next to the bilge pump just in case. I don't care for the lever action plug due to my tendency to over tighten which results in bending the cam portion of the lever. I used to insert plug from the inside thinking that a visual check on occasion would be nice but then it dawned on me that several hundred gallons of water in the cockpit would be a sufficient indicator to put life vest on. |
|
Back to top |
|
|
wilbe asea
Joined: 02 Nov 2003 Posts: 51 City/Region: Kenai
State or Province: AK
C-Dory Year: 2003
C-Dory Model: 22 Cruiser
Vessel Name: Sunset Ride
Photos: Sunset Ride
|
Posted: Sat Sep 25, 2004 4:48 am Post subject: |
|
|
I've always put mine on the inside, there is not much pressure trying to force it out when there is only a foot of water above it (8.34 X 1 x .052=.43 psi). I realize that would still be a lot of water coming in if the plug slipped out of the hole, but reasonable care should eliminate that possibility.
I mainly like to have on the inside so I can drain water from the cockpit when I am up on step (someone else at the helm of course), as the bilge pump is the one the factory installed, the digital switcher or whatever that only works if totally submerged. I use another pump, small, to pump water into the boat when I need to remove fish slime or some other stuff. Put some water in a bucket or the lazarette, then wash away as we cruise along. |
|
Back to top |
|
|
Otter-BelleHavenMarina
Joined: 03 Nov 2003 Posts: 390 City/Region: Alexandria
State or Province: VA
C-Dory Year: 2001
C-Dory Model: 22 Cruiser
Vessel Name: Otter
Photos: Otter
|
Posted: Sat Sep 25, 2004 11:45 am Post subject: |
|
|
I used to insert plug on outside until one debris-filled day on the Potomac I noticed a whole lot of water under my feet. Plug probably got twisted and caught on stick and popped out. Was glad to have spare. Now I put it in from the inside and still keep a spare on board. _________________ Tom on Otter |
|
Back to top |
|
|
DaveS
Joined: 01 Nov 2003 Posts: 3204 City/Region: Arlington
State or Province: WA
C-Dory Year: 2004
C-Dory Model: 22 Cruiser
Vessel Name: Sea Shift
Photos: Sea Shift
|
Posted: Sat Sep 25, 2004 4:44 pm Post subject: |
|
|
wilbe asea wrote: |
I mainly like to have on the inside so I can drain water from the cockpit when I am up on step (someone else at the helm of course) |
I'm with you "wilbe asea".....for the same reason I'm all for "innie" instead of "outie". _________________ Dave S.
"Sea Shift"
C-Brat #16 |
|
Back to top |
|
|
Lynn Marie
Joined: 30 Oct 2003 Posts: 440 City/Region: Redmond
State or Province: OR
C-Dory Year: 1997
C-Dory Model: 22 Cruiser
Photos: Lynn Marie
|
Posted: Sat Sep 25, 2004 8:11 pm Post subject: |
|
|
I'm an insider too. My trick since getting old and forgetful is to hang my handle type plug from a snap ring which I leave clipped on the tightening portion of my stern strap.
When I launch the boat and take off the strap I see and install the transom plug when I loosen the strap. The reverse is true for pulling the boat. When I put the strap on and get ready to tighten it down I see the empty snap which reminds me to remove the plug so the boat doesn't fill with rain, etc.
The simple reminders have always worked and I always know where to find the plug, it's right place for the place the boats in.
Tim _________________ Tim and Judy w/o the Lynn Marie |
|
Back to top |
|
|
Mr. Fisherman
Joined: 02 Nov 2003 Posts: 726
State or Province: OR
C-Dory Year: 1995
C-Dory Model: 22 Angler
Vessel Name: Sea Lion
Photos: Sea Lion
|
Posted: Sat Sep 25, 2004 10:37 pm Post subject: |
|
|
Inside for me.
I have a tendency to fill the boat with fish blood and slime. Pulling the plug when on step allows me to wash out the deck in a timely fashion, especially when crabbing in the spring when all of the crab smolt are present. I keep a spare handy and always (usually) stick my finger in the drain hole to check that it is in place before launching.
_________________
Live to Fish
Fish to Live |
|
Back to top |
|
|
|