"Owl" LED Anchor Light Installation

Rob & Karen

I thought I would post a picture of how I installed the Owl LED anchor light. It was recommended by Steve on SeaSpray and purchased from the following web site.

http://www.bebi-electronics.com/owl.html

Tortuga · Posted: Sun Feb 22, 2009 11:55 pm Post subject:

Nice job -- it looks like it was made for it.

SeaSpray · Posted: Mon Feb 23, 2009 2:09 am Post subject:

Hi Rob,

Very nice installation!

I compared the Owl light with a $100+ WM unit that has a double row of LEDs and the Owl was brighter.

Steve

starcrafttom · Posted: Mon Feb 23, 2009 1:22 pm Post subject:

Did you buy it on the pole or did you have to alter it your self?

Rob & Karen · Posted: Mon Feb 23, 2009 2:23 pm Post subject:

Tom,

I mounted it on the factory original Perko pole after cutting off the original light fixture.

Rob

starcrafttom · Posted: Tue Feb 24, 2009 9:29 pm Post subject:

Thanks rob. that is what i figured. I did not see a rigged one on the web site but I may have missed it, thanks.

20dauntless · Posted: Tue Mar 17, 2009 7:19 pm Post subject:

I bought the Dr. LED GE90 Star bulb ($45 from Fisheries Supply) and it fit right into the standard Perko anchor light. Not cheap, but it is legal and doesn't require any work to install. Can't comment on the power usage difference since I haven't measured. Here's a picture:

C-Green · Posted: Tue Mar 17, 2009 11:20 pm Post subject:

20dauntless,

I went to Fisheries Supply and found Dr. LED lights but no clue as to the correct bulb; there was no listing for a GE 90 replacement. How did you get the right bulb?

Jay

20dauntless · Posted: Tue Mar 17, 2009 11:27 pm Post subject:

Here's what I bought:

http://www.fisheriessupply.com/online/ln_menu/product.asp/mode/1/product_id/261327/Ntt/ge90/N/0/Dx/mode+matchallpartial/Nty/1/R/8861/D/ge90/catalog_name/FISCO/Ntx/mode+matchpartial+rel+Inactive/act/A01/Ntk/All

More info can be found at the Dr. LED site:

http://www.doctorled.com/ge90.htm