View previous topic :: View next topic |
Author |
Message |
Jazzmanic
Joined: 07 Feb 2005 Posts: 2232 City/Region: Seattle
State or Province: WA
Photos: C-Dancer
|
Posted: Tue May 22, 2007 2:56 pm Post subject: Raymarine S1000 Wireless Autopilot Installation |
|
|
I've read the threads of C-Brats who have the Raymarine S1000 Wireless Autopilot on their boat. My question, has anyone personally installed a Raymarine S1000 Wireless Autopilot on a CC22 Cruiser? If so, I need details because MINE ARRIVED TODAY and I want to install it this weekend!!
I've seen the video online, it doesn't seem that difficult and I have a good mechanical apptitude. My questions, how difficult is it? Where did you locate the course computer and the pump? How difficult was it to bleed the hydraulic system?
Please share your experiences as you can see, I'm chomping at the bit to install it.
Peter
C-Dancer |
|
Back to top |
|
 |
starcrafttom
Joined: 07 Nov 2003 Posts: 7935 City/Region: marysville
State or Province: WA
C-Dory Year: 1984
C-Dory Model: 27 Cruiser
Vessel Name: to be decided later
Photos: Susan E
|
Posted: Tue May 22, 2007 3:37 pm Post subject: |
|
|
Peter, I have one but did not install it. I would be happy to come down sunday and give you a hand. Sturgean fishing and bbq saturday if I can get it together. sunday i have nothing going at this point. If ou would like to come up and look at mine before you do yours just let me know. _________________ Thomas J Elliott
http://tomsfishinggear.blogspot.com/ |
|
Back to top |
|
 |
Pat Anderson
Joined: 02 Nov 2003 Posts: 8556 City/Region: Birch Bay, WA
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 25 Cruiser
Vessel Name: Daydream
Photos: Daydream and Crabby Lou
|
Posted: Tue May 22, 2007 4:00 pm Post subject: |
|
|
Good deal, when you guys get this figured out, I'll buy one too and we can have a BBQ at my house to install it, I will spring for the Q (pulled pork? brisket?) and beer! I have less than zero mechanical apptitude, so it is either feed you guys or pay Les...are you guys game? _________________
DAYDREAM - CD25 Cruiser
CRABBY LOU - CD16 Angler (sold 2020)
Pat & Patty Anderson, C-Brat #62!
http://daydreamsloop.blogspot.com
Last edited by Pat Anderson on Tue May 22, 2007 4:02 pm; edited 1 time in total |
|
Back to top |
|
 |
Jazzmanic
Joined: 07 Feb 2005 Posts: 2232 City/Region: Seattle
State or Province: WA
Photos: C-Dancer
|
Posted: Tue May 22, 2007 4:01 pm Post subject: |
|
|
Thanks Tom, I might take you up on your offer. Saturday, I'm going up to Twin Bridges to install my new Furuno 1623 Radar. Hopefully, that won't take more than a day. Then Sunday, I might try to tackle the AutoPilot.
BTW, as you once wrote in a thread, "I Love My Wife!". She not only previously approved the purchase of the radar but after the Lopez gathering, upon hearing Fred's recommendation, she approved the AutoPilot as well. Thanks Fred!
Tom, we'll see how the radar install goes. If I'm ready to tackle the Autopilot on Sunday, I'll drop by your house to check out your install.
Peter |
|
Back to top |
|
 |
Jazzmanic
Joined: 07 Feb 2005 Posts: 2232 City/Region: Seattle
State or Province: WA
Photos: C-Dancer
|
Posted: Tue May 22, 2007 4:01 pm Post subject: |
|
|
Pat, now that sounds like a plan!  |
|
Back to top |
|
 |
starcrafttom
Joined: 07 Nov 2003 Posts: 7935 City/Region: marysville
State or Province: WA
C-Dory Year: 1984
C-Dory Model: 27 Cruiser
Vessel Name: to be decided later
Photos: Susan E
|
Posted: Tue May 22, 2007 5:40 pm Post subject: |
|
|
peter is the minister of finace going with you sunday and are you interested in bbq at my place saturday after noon?
Pat what are you doing , if susan reads about pulled pork from our southern freind she will have me mowing your damm grass!!!!!!! We are going to have talk about banned subjects on this site!! |
|
Back to top |
|
 |
C-Hawk
Joined: 02 Nov 2003 Posts: 2150 City/Region: Carpinteria / Channel Islands
State or Province: CA
C-Dory Year: 2008
C-Dory Model: 22 Cruiser
Vessel Name: C-Hawk
Photos: C-Hawk
|
Posted: Tue May 22, 2007 6:16 pm Post subject: |
|
|
starcrafttom wrote: | We are going to have talk about banned subjects on this site!! |
Such as playing with your unit while waiting for the crabs?  _________________ Roger
2002- CD22- "Fishtales" returned to factory 2008
2008- CD22- "C-Hawk" Sold
KJ6VVB
A Brat I am, At sea I be
God is Great, Beer is Good.... and People are Crazy |
|
Back to top |
|
 |
starcrafttom
Joined: 07 Nov 2003 Posts: 7935 City/Region: marysville
State or Province: WA
C-Dory Year: 1984
C-Dory Model: 27 Cruiser
Vessel Name: to be decided later
Photos: Susan E
|
Posted: Tue May 22, 2007 6:41 pm Post subject: |
|
|
better then cooking while in the shower, which I have been accused of...or was it a request?? I forgot. |
|
Back to top |
|
 |
sportner
Joined: 08 Mar 2006 Posts: 386 City/Region: Buckeye
State or Province: AZ
C-Dory Model: 26 Osprey
Vessel Name: Glory Days
Photos: Traveler
|
Posted: Tue May 22, 2007 8:22 pm Post subject: |
|
|
Peter,
Toni and I installed the S1000 2 or 3 months ago on a Saturday, a mechanic I am not, but we had a successful installation. We gave it a good workout at the Lopez gathering and the week after cruising the islands and it works great. We didn't use it for trolling but for going in a straight line or from waypoint to waypoint....it will really spoil you.
They put everything in the box that you will need. We have a 25' so you may have to install diferently, the pump fit nicely, snuggled in with the wiring oposite the steering wheel, I put the course computer under the engine controls mounted on the starboard side of the plywood that encloses the refridgerator, it has to be mounted vertically. (I hope that confused you less than me) Just follow the directions, the bleeding worked just as they described it would, do remove anything you don't want to get oil on cuz it can be a little messy no matter how careful you are. Good luck. _________________ RUSS & TONI |
|
Back to top |
|
 |
C-Hawk
Joined: 02 Nov 2003 Posts: 2150 City/Region: Carpinteria / Channel Islands
State or Province: CA
C-Dory Year: 2008
C-Dory Model: 22 Cruiser
Vessel Name: C-Hawk
Photos: C-Hawk
|
Posted: Wed May 23, 2007 12:54 am Post subject: |
|
|
I used mine for trolling this past weekend-- worked great. I troll at 1.5 - 2 knots. Worked on the straight and the zig/zag, tried all 3 levels, liked the "L" best. Didn't try the other options.
Tom-
I'm trying to block the visual--- even though I have been known to BBQ in nothing but a "Bad Ass Coffee Co." apron gotta make use of this SoCal sun  |
|
Back to top |
|
 |
Jazzmanic
Joined: 07 Feb 2005 Posts: 2232 City/Region: Seattle
State or Province: WA
Photos: C-Dancer
|
Posted: Wed May 23, 2007 3:13 am Post subject: |
|
|
Russ, thanks for the info on your install. One question, with the pump being installed where it is (it sounds like it's installed on the back of the helm where the wiring is), does it make a lot of noise? If not, I'll probably install it in the same general area. The installation video sure makes it look easy. Too easy in fact but it's good to know you installed it by yourself. Glad to hear it works well.
You too, Roger. Glad you were able to test all your troll patterns. Caryn and I are looking forward to the time when we can both be in the cockpit fishing, with no one having to steer at the helm.
Tom, I'll probably be installing the radar on Saturday afternoon but thanks for the invite. BBQ sounds good. My bride will actually be in Atlanta with her daughter, so I'm left alone to play on the boat all weekend I'll give you a call on Sunday if I have time to stop by and check out your installation.
Peter |
|
Back to top |
|
 |
sportner
Joined: 08 Mar 2006 Posts: 386 City/Region: Buckeye
State or Province: AZ
C-Dory Model: 26 Osprey
Vessel Name: Glory Days
Photos: Traveler
|
Posted: Wed May 23, 2007 10:34 am Post subject: |
|
|
Peter, The pump does make a little noise but nothing you can't live with. The hoses included with the kit are pretty short so you can't put it too far from the existing steering pump. You will notice the pump more at displacement speeds as it makes more corrections than when on plane, but the performance will make up for the inconvenience of a little noise. I think you will like it. |
|
Back to top |
|
 |
C-Hawk
Joined: 02 Nov 2003 Posts: 2150 City/Region: Carpinteria / Channel Islands
State or Province: CA
C-Dory Year: 2008
C-Dory Model: 22 Cruiser
Vessel Name: C-Hawk
Photos: C-Hawk
|
Posted: Wed May 23, 2007 11:36 am Post subject: |
|
|
Peter,
Mine is installed under the helm with the computor to port of the wheel and the pump next to the hull. Yes, there is noise, but as Russ said- the convenience over rides the noise.
If you set a waypoiont, be sure to stay on course when you set the pilot to follow the course. Otherwise, the pilot will search for the course and you may be in for a ride.
We were out for a sunset cruise with some friends, Pat was standing behind me and our friends were on the sofa. I was off course when I set the pilot- the gal sitting across from me wound up on my lap as the boat turned sharp to port. I told her that was my SOS turn--- Slide Over Sweety.  |
|
Back to top |
|
 |
Jazzmanic
Joined: 07 Feb 2005 Posts: 2232 City/Region: Seattle
State or Province: WA
Photos: C-Dancer
|
Posted: Wed May 23, 2007 1:23 pm Post subject: |
|
|
Thanks guys. Final question. As I was reading the manual, it said that the default was "Fishing Mode" and not to change it to Sail or Power mode. It also noted that the settings were for trolling speeds for fishing. Have you set up the AutoPilot to follow a GPS track at cruising speed? If so, do you need to change the mode to Power to cruise at, say 18 knots or will it work just fine staying in Fish Mode? The manual said it affects the calibration if you do.
This is definitely a thing that makes you go HMMM? |
|
Back to top |
|
 |
C-Hawk
Joined: 02 Nov 2003 Posts: 2150 City/Region: Carpinteria / Channel Islands
State or Province: CA
C-Dory Year: 2008
C-Dory Model: 22 Cruiser
Vessel Name: C-Hawk
Photos: C-Hawk
|
Posted: Wed May 23, 2007 1:30 pm Post subject: |
|
|
I leave it in fishing mode and it follows track at cruising speed. |
|
Back to top |
|
 |
|