View previous topic :: View next topic |
Author |
Message |
thataway
Joined: 02 Nov 2003 Posts: 20860 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Wed Sep 06, 2006 6:03 pm Post subject: |
|
|
Mike,
I think that with the proper siezing and some heat shrink, Joe's would do fine in 30 to 40 knots with the C Dory--but I am sticking to my tried and true 3 strand over the chain splice
http://www.neropes.com/splice/sp72_3-strand_to_chain.htm
--since I don't have any problems with the windlass jamming. Joe has a different windlass, and I do belive that in his case, he will do better with the rope to chain weave, similar to what he devised. However I would weave the third strand down the chain, either split or whole, as in the illustrations:
http://www.bluemoment.com/warpchainsplice.html _________________ Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
Back to top |
|
|
Sea Wolf
Joined: 01 Nov 2003 Posts: 8650 City/Region: Redding
State or Province: CA
C-Dory Year: 1987
C-Dory Model: 22 Cruiser
Vessel Name: Sea Wolf
Photos: Sea Wolf
|
Posted: Wed Sep 06, 2006 6:59 pm Post subject: |
|
|
Thanks, again, Bob for the links and the vote of confidence!
Joe. _________________ Sea Wolf, C-Brat #31
Lake Shasta, California
"Most of my money I spent on boats and women. The rest I squandered'. " -Annonymous |
|
Back to top |
|
|
Papillon
Joined: 31 Mar 2005 Posts: 949 City/Region: DeBary, Fl. *On the St. John's River*
State or Province: FL
C-Dory Year: 1993
C-Dory Model: 22 Angler
Vessel Name: Papillon
Photos: Papillon
|
Posted: Wed Sep 06, 2006 7:06 pm Post subject: |
|
|
Ok, now then Bob and Joe, we are good to go now. Since I have a problem with my splice jamming up in the windlass I liked the look of Joe's Splice and was hoping it proved to be a good one. Now that I have heard it from the horses's mouth so to speak, I will attempt to make a rope to chain splice and if you hear of me being blown away in the future, you can rest asured that I was giving you both a cussing as I sailed down wind. _________________ Mike Taylor
330-936-1030
1993 Angler-02' 115 Suzuki 4 Stroke |
|
Back to top |
|
|
Sea Wolf
Joined: 01 Nov 2003 Posts: 8650 City/Region: Redding
State or Province: CA
C-Dory Year: 1987
C-Dory Model: 22 Cruiser
Vessel Name: Sea Wolf
Photos: Sea Wolf
|
Posted: Wed Sep 06, 2006 8:09 pm Post subject: |
|
|
Mike-
The anchor splicing and a lot of other marlinspike projects are a lot of fun and enhance your own self-confidence as a powerboater/sailor.
Have fun and enjoy yourself!
Joe. |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20860 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Wed Sep 06, 2006 9:04 pm Post subject: |
|
|
I learned marlinspike seamanship from my father as I was growing up. It was always a fun diversion, as well as being practical. Four of us spent the first 3 days of an atlantic crossing making "Baggy Wrinkle" and then winding it around the shrouds to prevent chafe on the sails on a 17 day passage all down wind. The basic skills are very simple and one does not even need tools; using a phillips screwdriver as a fid if necessary. I do like to use a palm and pair of needle nose pliers when sewing with the heavy waxed dacron thread for the sizing. It is good to have at least one sail making needle and some thread on the C Dory, to do minimal canvas repair if necessary.
Have fun! |
|
Back to top |
|
|
Not For Hire
Joined: 20 May 2004 Posts: 347 City/Region: Cadillac, MI
State or Province: MI
C-Dory Year: 2004
C-Dory Model: 22 Cruiser
Vessel Name: Not For Hire
Photos: Not For Hire
|
Posted: Thu Sep 07, 2006 12:13 pm Post subject: |
|
|
Thataway wrote Quote: | I will have to admit I was surprised. I used a Ford Excursion as the anchor, with brake set--tied the anchor rode to the tow eyes on the front, and the come along to the trailer hitch on the Honda Pilot. First test, was pulling the Honda Pilot up a 10% grade--no problem, and no strain on the splice. |
I think Bob is trying out for Mythbusters.
I flashed on this mental picture. It reminded me 2AM, dirt parking lots, distant taverns, hooking pickups together with logging chains and seeing who pulled who. (Dodge never won but that was a long time ago).
Mark _________________ Mark S
Cadillac, Michigan |
|
Back to top |
|
|
oldgrowth
Joined: 27 Jun 2005 Posts: 2196 City/Region: Rochester
State or Province: WA
C-Dory Year: 2002
C-Dory Model: 16 Cruiser
Vessel Name: C-Voyager
Photos: C-Voyager
|
Posted: Thu Sep 07, 2006 4:08 pm Post subject: |
|
|
I use a modified 3-strand rope to chain splice that is shown in this link.
In figure 4. The white strand (that is under the red strand that skips a link) is brought over the red strand and the same for all skipped links. It makes a tighter splice. Don’t know if it is stronger but then I only have a 16’ Cruiser and have 300’ of 3/8th line. _________________ Dave
Last edited by oldgrowth on Wed Mar 05, 2008 7:11 am; edited 1 time in total |
|
Back to top |
|
|
Sea Wolf
Joined: 01 Nov 2003 Posts: 8650 City/Region: Redding
State or Province: CA
C-Dory Year: 1987
C-Dory Model: 22 Cruiser
Vessel Name: Sea Wolf
Photos: Sea Wolf
|
Posted: Thu Sep 07, 2006 4:34 pm Post subject: |
|
|
Dave-
I guess there are more than one way to skin a cat! (Sorry Catman!)
A variety of ways will probably do the splice, and as long as it works, it's OK!
When you sew all the strands together at all the crossings, it gets pretty tight.
The other issue is to make it such that the abrasion from the windlass chain pockets/rope teeth is minimized by hiding the rope strands of the transition down within the chain links, and not riding out on the chain shoulders.
Lotsa' fun no matter how ya' do it, just like you know what!!!
Joe. |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20860 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Thu Sep 07, 2006 6:39 pm Post subject: |
|
|
Dave,
That is the "usual" way that the rope to chain weave is done. I distinguish the weave from a splice. There is not a lot of wear on any of these splices, nor a lot of wear on the line--which is surprising. When I first got the Sea Horse Windlass in the late 70's I thought that chafe and wear on the line would be a major problem. |
|
Back to top |
|
|
Sea Wolf
Joined: 01 Nov 2003 Posts: 8650 City/Region: Redding
State or Province: CA
C-Dory Year: 1987
C-Dory Model: 22 Cruiser
Vessel Name: Sea Wolf
Photos: Sea Wolf
|
Posted: Sun Jul 26, 2009 3:46 pm Post subject: |
|
|
Update:
July 26, 2009, one month short of three years, and no detectable wear or any problem with the new type splice.
Joe. |
|
Back to top |
|
|
Tug
Joined: 22 Jun 2007 Posts: 983 City/Region: Sault Ste. Marie
State or Province: ON
C-Dory Year: 1985
C-Dory Model: 22 Angler
Vessel Name: Drifter
Photos: Drifter
|
Posted: Mon Aug 22, 2011 9:03 pm Post subject: |
|
|
My current rope/chain splice was getting worn and jammed it the Windlass,in fact my Pressure Arm on my Windlass broke today. I attemped to follow Joe's instructions ( thataway ) and did the two down the chain/one up the rope splice with limited success. Hope it will pass thru the Windlass.
Is it very difficult to replace the " Pressure Arm " on a Windlass. Tug
http://i1201.photobucket.com/albums/bb355/Tug7/100_0352.jpg |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20860 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Mon Aug 22, 2011 9:52 pm Post subject: |
|
|
The follower arm should not be all that hard to replace. (not sure which windlass you have--photos look like a vertical axis Lewmar?)--usually the capstan has to be removed, and there are 2 to 3 allen key bolts holding the bracket for the follower arm. Pull those bolts, unscrew the capstan (and you need to clean and grease the clutches anyway)...Replace the follower.
You really want that arm in place. |
|
Back to top |
|
|
Tug
Joined: 22 Jun 2007 Posts: 983 City/Region: Sault Ste. Marie
State or Province: ON
C-Dory Year: 1985
C-Dory Model: 22 Angler
Vessel Name: Drifter
Photos: Drifter
|
Posted: Tue Aug 23, 2011 7:42 am Post subject: |
|
|
I have a Maxwell RC 500 Windlass...just found/read the instructions. The replacement pressure arm doesn't seem to difficult to reinstall.( knock on wood ) . Never-the-less i am off to retrieve the boat from the marina to do the work at home, i am prone to dropping stuff over-board. While i am at it i will cut the new splice off and reverse the rope,than resplice, it did look worn and might as well do the job correctly. Easy job for some but it will take me all day if i am lucky. Tug |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20860 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Tue Aug 23, 2011 11:35 am Post subject: |
|
|
When we were cruising full time, we cut the rope to chain splice off every year and reversed both the line and chain. You are wise to take the boat out of the water if any risk of loosing parts. |
|
Back to top |
|
|
Tug
Joined: 22 Jun 2007 Posts: 983 City/Region: Sault Ste. Marie
State or Province: ON
C-Dory Year: 1985
C-Dory Model: 22 Angler
Vessel Name: Drifter
Photos: Drifter
|
Posted: Tue Aug 23, 2011 5:07 pm Post subject: |
|
|
Well i brought my boat back to the marina about 2:30 PM today.Wasn't all that easy to install the Pressure Arm,the clip insulator was a puzzle to me. I removed the old clip insulator and installed the new one.I assume that the Pressure Arm Clip slides into the Clip Insulator but no where does it say that.The Pressure Arm Clip doesn't fit into the Clip Insulator.When all else fails get the hammer..i am not sure if i installed it correctly but i positioned the Pressure Arm Clip over the Clip Insulator and gently hammered the Pressure Arm Clip into the Clip Insulator.Snug fit but maybe it is suppose to be..everything works correctly.See photo's in album.
The new splice sailed smoothly thru the Windlass.
On another subject i lowered my Airmar P66 transducer to about 1/4" ,hopefully i this will improve reception. Tug |
|
Back to top |
|
|
|