View previous topic :: View next topic |
Author |
Message |
mikeporterinmd
Joined: 15 Sep 2006 Posts: 645
State or Province: MD
C-Dory Year: 2002
C-Dory Model: 22 Cruiser
Vessel Name: Shelly IV
Photos: Shelly-IV
|
Posted: Sun Jan 06, 2008 12:13 pm Post subject: CD-22 Bildge Pump Discharge is 1 1/8" |
|
|
I only mention this because I have never heard of 1 1/8" hose, and
I spent a lot, a lot, of energy trying to get 1" sanitation style hose on
the fitting. Duh.
Mike |
|
Back to top |
|
|
westward
Joined: 18 Feb 2005 Posts: 718 City/Region: Seattle
State or Province: WA
C-Dory Year: 1985
C-Dory Model: 16 Angler
Vessel Name: TBD
Photos: Steady Eddy
|
Posted: Sun Jan 06, 2008 12:41 pm Post subject: |
|
|
I ran into this issue before and I'll expand a bit: It seems that the industry standard for bilge pump discharge hose (at least for recreational boats) is 1-1/8" diameter hose. Moreover, the most standard hose itself is a stiff, corrugated, non-UV stabilized , thin-walled PVC plastic hose that's commonly sold by the foot, complete with incremental breakaway sections every foot. IMHO the stuff is garbage, completely unsuitable for a hose upon which one's life may someday depend. Luckily C-Dory now uses a more resilient, rubberized type of discharge hose, at least on our 2007 Angler. I went to replace the hose on my old Cruiser that had cracked, and the stuff literally crumbled in my hands! Of the systems on your boat that you should err on the side of heavy-duty/robust/redundant, the bilge pump should be near the top of the list. Later, Mike. |
|
Back to top |
|
|
Sea Wolf
Joined: 01 Nov 2003 Posts: 8650 City/Region: Redding
State or Province: CA
C-Dory Year: 1987
C-Dory Model: 22 Cruiser
Vessel Name: Sea Wolf
Photos: Sea Wolf
|
Posted: Sun Jan 06, 2008 3:29 pm Post subject: |
|
|
I totally agree with Westward about the unsuitability of the cheap plastic corrugated bilge pump hose. Using a good Neoprene hose (which resists gasoline and oil) is much better. The smooth inner walls also don't resist and restrict flows like the cheap stuff, either.
Bilge pumps for our size boats come with two size output ports, 3/4" and 1-1/8", depending on their gph (gallons per hour) output, with the pumps under 1000 gph generally taking the smaller hose, and the 1-1-1/8 for the larger pumps.
Pumps need to regularly checked for performance, cleaned out of debris in their intakes, and checked to be sure the electrical connections are secure and not corroding. The last is an especially hidden problem because of the use of solderless connectors and the presence of bilge water. Solderless connectors should be coated with liquid electrical tape and/or sealed with shrink tubing. Keep all connections up out of the bilge water to every degree possible.
Boats left in the water should have their bilge pumps wired directly to the battery with only a fuse to protect them and their wires from shorts. No switch should intervene that could be left off and leave the boat in jeopardy. Of course, once the battery is dead...................., therefore, somebody has to have an eye out or be checking in on the boat as needed unless tied to shore power to recharge the system.
Just more to think about and check out!
Joe. _________________ Sea Wolf, C-Brat #31
Lake Shasta, California
"Most of my money I spent on boats and women. The rest I squandered'. " -Annonymous
Last edited by Sea Wolf on Sun Jan 06, 2008 8:01 pm; edited 1 time in total |
|
Back to top |
|
|
mikeporterinmd
Joined: 15 Sep 2006 Posts: 645
State or Province: MD
C-Dory Year: 2002
C-Dory Model: 22 Cruiser
Vessel Name: Shelly IV
Photos: Shelly-IV
|
Posted: Sun Jan 06, 2008 6:21 pm Post subject: |
|
|
Yeah, better pumps and hoses is what started this project. The small
pumps aren't holding up, so I decided to go with a Jabsco "Water Puppy".
It has a 1" outlet. Not sure if this was the best choice since this type
of pump can't run dry. The switch is a "Water Witch". It's gph is
much lower than what a regular bildge pump is rated at, but we also
know those ratings are largely BS. This pump has a beefy 15 amp
motor, so it should throw some water.
I ordered a 1" to 1 1/8" adapter from Defender, so we'll see how it all
works. The pickup is a bronze pickup with a good screen made by
Perko.
I don't believe this setup will remove a huge amount of water from the
boat. But, given this is a CD-22, there aren't a lot of ways for large
amounts of water to enter the boat that any pump will remove. In other
words, if I start taking waves over the stern, no pump is going to
remove that before the boat sinks(1). However, this pump should remove
rain water and spray nicely.
1) Well, there is the human power bucket pump. That can remove
some water!
Mike |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20812 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Sun Jan 06, 2008 8:48 pm Post subject: |
|
|
I have carried Jabsco water puppies on my cruising boats, as moderate volume pumps. They are wonderful pumps, but only 6 to 7 gallons a minute. I used them to transfer fuel (diesel, with a nitrile impellor, or de water the dinghy if there was a lot of water, or to substitute for the generator water pump when it failed). For a back up bilge pump, I like the old diaphragm Jabsco pump, without a pressure switch. They will run dry and be used like a "shop vac" for water. The pumps which use 1 1/8" tubing run from 26 to 35 gallons a minute (or so they are rated, at zero head). I agree that for the small boats, most of the time the 6 gallons a minute is OK, but you also need a large volume pump, we keep a "3700 Gal per hour"--1 1/2" discharge pump with battery clips for emergencies, when large amounts of water need to be moved.
I sure agree with the corregated hose--it is not worthy of being on a boat. I adapt the pump to a re-enforced hose when ever possiable. _________________ Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|