View previous topic :: View next topic |
Author |
Message |
Dora~Jean
Joined: 09 Mar 2004 Posts: 1505 City/Region: Simi Valley
State or Province: CA
C-Dory Year: 2003
C-Dory Model: 25 Cruiser
Vessel Name: Dora~Jean
Photos: Dora~Jean
|
Posted: Sun Dec 03, 2006 12:25 pm Post subject: Splash Rails on a CD? |
|
|
I'm not positive, but I think my CD25 is wetter than others in heavy chop because I kept my bow down more than the 22's and others. Seems my wipers get a pretty good workout most trips. I ran across this article in Power & Motoryacht (free subscrip) regarding splash rails. Got me thinking. Maybe, just maybe it would take some of the spray out of my trips...
I scanned 3 pictures on this article, they start here.
The placement on this person's boat is different than would be mine, his is higher for his sharp bow, displacement type hull. I'd probably go with just above the lowest chine-strake at the waterline or close to it. Anybody had any thoughts towards this on their boat? Would hate to disturb the lines, they make two widths, it epoxys to the hull. At $600 (mail order), a bit steep in price to experiment, but are made very tough according to the author. Also, if your placement isn't right the first time, ahh, oh well, can't change it without major reconstructive surgery. I have the complete article if anyone is interested.
Link fixed by Da Nag _________________ Steve & Carmen
"Great works are performed not by strength, but perseverance" (Samuel Johnson)
Dora~Jean C-Dory 25 2002-Present
Corsair F-31 Trimaran 1996-2002
MacGregor 26X 1988-1996
Glaspar Seafair Sedan 18 (2)
StarCraft 19 & 22
Catalina 17 & 22
Crestliner 19
+4 Previous, 1/2 sail, 1/2 power
Last edited by Dora~Jean on Sun Dec 03, 2006 10:19 pm; edited 1 time in total |
|
Back to top |
|
|
AstoriaDave
Joined: 31 Oct 2005 Posts: 994 City/Region: Astoria
State or Province: OR
|
Posted: Sun Dec 03, 2006 10:00 pm Post subject: |
|
|
Steve, you can fashion some spray rails out of oak, to whatever cross section you like, to whatever length you prefer, and glass them onto the hull. Re-coat with epoxy, and sand and finish with good epoxy paint, and they will last forever. For a lot less than $600.
Looks like a ten-foot piece of 5/4 by 4 inch oak should be plenty. Any friend with a table saw and a rip fence can fashion the shape you need. the epoxy and any glass would run maybe $30, tops.
Fasteners to hold it to the hull while the epoxy adhesive sets might be problematical. Others here will know what to use. _________________ Dave Kruger
Astoria, OR |
|
Back to top |
|
|
Dora~Jean
Joined: 09 Mar 2004 Posts: 1505 City/Region: Simi Valley
State or Province: CA
C-Dory Year: 2003
C-Dory Model: 25 Cruiser
Vessel Name: Dora~Jean
Photos: Dora~Jean
|
Posted: Sun Dec 03, 2006 10:26 pm Post subject: |
|
|
Bill, thanks for the reference correction, didn't work when I previewed, just thought it was some security update. What did I do wrong, I've been successful before?
Dave, good idea, but me, fiberglass and a job I'd be proud of are not particularly well suited together. I'm OK with a hidden, brute-force type job, but something this visible might not 'maintain' the value of the boat...I'll give it some thought though, if nothing else as a more temporary method of finding the optimum location (if I do it that is). |
|
Back to top |
|
|
AstoriaDave
Joined: 31 Oct 2005 Posts: 994 City/Region: Astoria
State or Province: OR
|
Posted: Sun Dec 03, 2006 10:56 pm Post subject: |
|
|
Dora~Jean wrote: | Dave, good idea, but me, fiberglass and a job I'd be proud of are not particularly well suited together. I'm OK with a hidden, brute-force type job, but something this visible might not 'maintain' the value of the boat...I'll give it some thought though, if nothing else as a more temporary method of finding the optimum location (if I do it that is). | Yeah, I don't blame you. I'd hesitate, also, if I had never done any glass work on the exterior of a boat. If you get brave enough, do a dry run using some scrap oak on a curved surface similar in curvature to the area on your boat. Maybe a sheet of quarter inch plywod or similar, glassed with some 6 oz cloth, and then bent over a saw horse. That would be a real confidence-builder.
As far as placement ... I'd guess if you followed the line of one of the upper strakes, that would be good enough.
Somebody else here must have tried this already ... they should chime in soon enough. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|