View previous topic :: View next topic |
Author |
Message |
SeaSpray
Joined: 12 Mar 2004 Posts: 1007 City/Region: Brentwood, CA
State or Province: CA
C-Dory Year: 2004
C-Dory Model: 22 Cruiser
Vessel Name: SeaSpray
Photos: SeaSpray
|
Posted: Mon Aug 14, 2023 1:49 am Post subject: |
|
|
Thanks Jim, we also enjoy our time with you and Cath. Thanks for for putting these trips together.
Steve |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
colbysmith
Joined: 02 Oct 2011 Posts: 4548 City/Region: Madison
State or Province: WI
C-Dory Year: 2009
C-Dory Model: 25 Cruiser
Vessel Name: C-Traveler
Photos: C-Traveler and Midnight-Flyer
|
Posted: Wed Aug 30, 2023 8:34 am Post subject: |
|
|
After 4000+ miles on the trailer, C-Traveler arrived home with us yesterday afternoon with no major events. We had one issue with the fresh water pump. After a week in 100+ degree heat, in Goodyear, Az., the thermal protection / pressure switch took a hit. Water pump didin't work when I went to wash my hands after having lunch the day we left Goodyear. I was able to wire around the pressure switch temporarily to get water flowing again! New pump from Amazon arrived yesterday evening, along with a new pressure switch to fix the old pump and keep it as a spare!
While very minor, after arriving at Marina Del Rey, I noticed that the bushings around the trailer caliper slider pins, on the right side, on the bottom, had all disappeared. I was able to temporarily fix this by using some red silicone and filling in around the pins. (Thanks for the silicone, Jim!) Sometime this week I will be pulling the calipers, cleaning out the silicone and replacing the bushings. But my question is, why is this happening! If you remember, I had both right side calipers come off, only being held by the tire rims, on that same side earlier this year when I drove out to Rio Vista for the Delta Cruise. That was because 3 of the 4 pins had broken off, with 1 pin completely gone. The bushings were all gone in that case as well. I suspect that the bushings came out, as this time, and allowed the calipers to break off the pins. At least this time I caught it before the pins were broken off. I'll move this discussion over to the earlier thread regarding brake caliper problems. Colby |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|