Cleaning mold out of old foam

[starcrafttom]

We had a mold explosion this winter in the cdory and are getting it cleaned up. Funny that it happened during the snow storms.

Here is a picture of the foam. How should we go about cleaning it??

[thataway]

Tom,
Both chlorine and white vinegar will kill the mold. Another often touted method is to use equal parts of 90% isopropyl alcohol and warm water.

When foam gets into the deep part of the foam it is gong to be time to buy new foam!

[starcrafttom]

We made the same decision yesterday Bob. Ordered a new custom foam topper yesterday. Slumber Ease is a local manufacturer here in Marysville wa. Their main product is custom mattresses for bed but they also sell the same for Boats , RVs , Chairs, etc. I spent an
hour talking to the owner Nick yesterday. He suggested that we go with a topper that is two different layers of foam of different stiffness. Hes going to layer the topper and cut to size. Foam in the last year has jumped up 140% in cost. So this is going to be about $300 cash. Not what I wanted to do but looks like what has to be done.

If any one is looking for a mattress custom made to fit you nick is the guy to talk to. Family owned business since 1962 https://slumberease.com/marine-rv-mattresses/

[NORO LIM]

We had a two-layer mattress topper made locally for our boat. It was a great addition. We liked it so much we had one made for our pull-out guest bed at home. Sorry (but not surprised ) to hear the cost has shot up!

[BrentB]

Try hot soapy water with a cup of bleach per gallon of water . Saturate for 30 min or longer. Rinse well. Wring out as much water as soon as possible . Use a box fan on it in garage if possible . Finish drying in full water. Good luck

Need to check if items are bleach safe, too
If possible store items indoors when not in use.
Foam absorbs moisture