View previous topic :: View next topic |
Author |
Message |
chastedt
Joined: 11 Sep 2020 Posts: 3 City/Region: freeport, Maine
|
Posted: Thu Oct 28, 2021 12:31 pm Post subject: help finding gasket material |
|
|
Hi. I have a wonderful C-Dory 23 but need to replace the gaskets for the rear hatches that house the batteries. The old gaskets are leaking and we can't find the right size material to replace it. Called C-Dory and they said they don't have what we need. Any thoughts as to where we can find gasket material to make new gaskets for our boat? Thanks for any help you can give! Best Burt Brewer |
|
Back to top |
|
|
johnr
Joined: 08 Apr 2007 Posts: 308 City/Region: Bellingham
State or Province: WA
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: Stillwater
Photos: Surf Scoter
|
Posted: Thu Oct 28, 2021 1:17 pm Post subject: |
|
|
I'm just joining in here because I have the same issue with the cockpit hatches on my 25. Right now, the leak so much, I might as well not even have hatches! |
|
Back to top |
|
|
Standas
Joined: 07 Sep 2019 Posts: 53 City/Region: Poulsbo
State or Province: WA
C-Dory Year: 2013
C-Dory Model: 25 Cruiser
Vessel Name: C -Time
Photos: C -Time
|
Posted: Thu Oct 28, 2021 3:47 pm Post subject: |
|
|
I would try Steele rubber. You can send them a picture with dimensions and they can usually match it up. Good luck |
|
Back to top |
|
|
JohnnyD
Joined: 09 Jul 2020 Posts: 23 City/Region: Panama City
State or Province: FL
C-Dory Year: 2006
C-Dory Model: 22 Cruiser
Vessel Name: Gypsy Rose
Photos: Gypsy Rose
|
Posted: Thu Oct 28, 2021 5:03 pm Post subject: |
|
|
This topic has been covered on this site for years. If you can't access the link below, go to the Forums hyperlink at the top of the home page and type in "Replacement Lazarette Covers (Again)". The thread is full of great info., I've purchased my new covers but haven't installed them yet...the color "dream white" is spot on. Good luck.
http://www.c-brats.com/viewtopic.php?t=20100&sid=6417579fb9c74b6c0088972bd6aa4bbc _________________ Gypsy Rose - 2006 22 Cruiser;
July 2020 thru current
Home port: Panama City FL |
|
Back to top |
|
|
johnr
Joined: 08 Apr 2007 Posts: 308 City/Region: Bellingham
State or Province: WA
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: Stillwater
Photos: Surf Scoter
|
Posted: Thu Oct 28, 2021 5:18 pm Post subject: |
|
|
JohnnyD wrote: | This topic has been covered on this site for years. If you can't access the link below, go to the Forums hyperlink at the top of the home page and type in "Replacement Lazarette Covers (Again)". The thread is full of great info., I've purchased my new covers but haven't installed them yet...the color "dream white" is spot on. Good luck.
http://www.c-brats.com/viewtopic.php?t=20100&sid=6417579fb9c74b6c0088972bd6aa4bbc |
I have found a lot of info here regarding the replacement of hatches, but not so much if one wants to try just replacing the gaskets. I know Bob of Thataway has done this. |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20860 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Thu Oct 28, 2021 9:06 pm Post subject: |
|
|
I cannot shed any light onto the gaskets needed for the 23. I added some gasket material which I got from Amazon auto parts section as a second gasket set on the floor hatches of the 25. It seemed to help with leaking, but not totally prevent leaking. I used that as a second set of gaskets on the bottom of the hatch cover, just inside of the gaskets which were on the edge of the cockpit floor extrusion. _________________ Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
Back to top |
|
|
rogerbum
Joined: 21 Nov 2004 Posts: 5922 City/Region: Kenmore
State or Province: WA
C-Dory Year: 2008
C-Dory Model: 255 Tomcat
Vessel Name: Meant to be
Photos: SeaDNA
|
Posted: Thu Oct 28, 2021 9:49 pm Post subject: |
|
|
If they are flat gaskets, I find you can buy anything you need at McMaster Carr. Just get sheets and trim it with an exacto knife. _________________ Roger on Meant to be |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20860 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
|
Back to top |
|
|
localboy
Joined: 30 Sep 2006 Posts: 4656 City/Region: Lake Stevens via Honolulu
State or Province: WA
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: 'Au Kai (Ocean Traveler)
Photos: 'AU KAI
|
Posted: Thu Oct 28, 2021 11:42 pm Post subject: |
|
|
The only solutions to both issues are this: replace all hatches with one that don’t leak.
Here is the hatch replacement for the 25. I’ve done it and they are a massive improvement. http://www.c-brats.com/viewtopic.php?t=26390&highlight=hatches
I know the 22 hatches have also been covered ad nauseam. On a 23, I have no experience. _________________ "We can go over there...behind the 'little one'....."
Wife to her husband pointing @ us...from the bow of their 50-footer; Prideaux Haven 2013 |
|
Back to top |
|
|
hardee
Joined: 30 Oct 2006 Posts: 12633 City/Region: Sequim
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 22 Cruiser
Vessel Name: Sleepy-C
Photos: SleepyC
|
Posted: Fri Oct 29, 2021 12:08 am Post subject: Re: help finding gasket material |
|
|
chastedt wrote: | Hi. I have a wonderful C-Dory 23 but need to replace the gaskets for the rear hatches that house the batteries. The old gaskets are leaking and we can't find the right size material to replace it. Called C-Dory and they said they don't have what we need. Any thoughts as to where we can find gasket material to make new gaskets for our boat? Thanks for any help you can give! Best Burt Brewer |
Depending on your hatch covers, even replacing the gaskets will not stop the leaks IF, the hatches are not designed for horizontal installation. The C-Dory factory has, (for a long time), used the WRONG hatches and they were installing hatches not meant for horizontal service. Way back when, (2006 or so, Joel and his wife set up a replacement hatch distribution center and provided, at cost, the correct hatches, in batches of 10. I don't know how many orders he did, but several at least. And there was some serious outcry among the Brat Kingdom over some time before the factory changed to the correct hatch covers. I was one of the ones who ordered early on and it was really the first thing I did for my boat. NO more leaks and no worries about the gaskets, no need. The new covers go over the outside edge of the inside lip, so no water gets in --- PERIOD !!! It was an easy mod and one of the most worthwhile.
So, chastedt, You said:
". . . I have a wonderful C-Dory 23. . . " But we don't know what year, or if it is a Cape Cruiser or Venture 23 version of C-Dory. That information would be helpful. And if you fill out the full profile page it makes answering your questions much easier. Glad you have a wonderful C-Dory. Yup, so do I and a few thousand of the rest of us. Enjoy.
Harvey
SleepyC
_________________ Though in our sleep we are not conscious of our activity or surroundings, we should not, in our wakefulness, be unconscious of our sleep. |
|
Back to top |
|
|
|