View previous topic :: View next topic |
Author |
Message |
seagrits@aol.com
Joined: 20 Aug 2020 Posts: 9 City/Region: Ridgeland, South Carolina
State or Province: SC
|
Posted: Mon Dec 07, 2020 7:02 pm Post subject: Wallas 95d |
|
|
Evening all,
I have a wallas 95d. When I purchased the boat, it was inoperable, and after a little investigation I found the diesel tank full of some really bad fuel and the fuel pump gummed badly too. I was able to get all of that taken care of, and the stove worked perfectly for several trips.
Recently, it has a different symptom that I can't figure out. Here's the sequence:
1. Turn on, green power light is on and not flashing. (Voltage is good)
2. The audible noise of both the blower and the pump are apparent.
3. The sound of the flame being ignited.
4. Heat is felt over the left burner.
5. Red light never turns solid but rather goes to flashing failure mode.
I'm suspect of either a board problem, or maybe a device that tells the board that there is flame. What would this device be and how can it be tested? A milliamp signal from a thermocouple,, or perhaps a millivolt signal from a flame rod? Also, where does this device connect on the board? Is it possible the burner could just need cleaning?
I'm kind at a lost with this thing so any and all pointers are appreciated. |
|
Back to top |
|
|
tsturm
Joined: 01 Nov 2003 Posts: 1134 City/Region: Soldotna
State or Province: AK
C-Dory Year: 2003
C-Dory Model: 25 Cruiser
Vessel Name: JMR TOO
Photos: JMR-TOO
|
Posted: Mon Dec 07, 2020 11:01 pm Post subject: Re: Wallas 95d |
|
|
seagrits@aol.com wrote: | Evening all,
I have a wallas 95d. When I purchased the boat, it was inoperable, and after a little investigation I found the diesel tank full of some really bad fuel and the fuel pump gummed badly too. I was able to get all of that taken care of, and the stove worked perfectly for several trips.
Recently, it has a different symptom that I can't figure out. Here's the sequence:
1. Turn on, green power light is on and not flashing. (Voltage is good)
2. The audible noise of both the blower and the pump are apparent.
3. The sound of the flame being ignited.
4. Heat is felt over the left burner.
5. Red light never turns solid but rather goes to flashing failure mode.
I'm suspect of either a board problem, or maybe a device that tells the board that there is flame. What would this device be and how can it be tested? A milliamp signal from a thermocouple,, or perhaps a millivolt signal from a flame rod? Also, where does this device connect on the board? Is it possible the burner could just need cleaning?
I'm kind at a lost with this thing so any and all pointers are appreciated. |
Call scan marine? They will answer all your questions. |
|
Back to top |
|
|
NORO LIM
Joined: 24 Apr 2008 Posts: 875 City/Region: Olympia
State or Province: WA
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: NORO LIM (sold 12/12/14)
Photos: NORO LIM
|
Posted: Tue Dec 08, 2020 12:38 am Post subject: Re: Wallas 95d |
|
|
tsturm wrote: | . . .
Call scan marine? They will answer all your questions. |
Agree 100%. _________________ Bill, Formerly on NORO LIM
2001 CD 16, 2001-2006
2006 CC 23, 2006-2014 |
|
Back to top |
|
|
tsturm
Joined: 01 Nov 2003 Posts: 1134 City/Region: Soldotna
State or Province: AK
C-Dory Year: 2003
C-Dory Model: 25 Cruiser
Vessel Name: JMR TOO
Photos: JMR-TOO
|
Posted: Tue Dec 08, 2020 9:42 am Post subject: |
|
|
SCAN MARINE EQUIPMENT
2144 Westlake Ave N, Ste. D Seattle, WA 98109
ph: 888-606-6665 | fx: 206-285-9532
CONTACT US | SALES | SERVICE |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|