View previous topic :: View next topic |
Author |
Message |
Catch 22
Joined: 01 May 2008 Posts: 385 City/Region: Lynnwood
State or Province: WA
C-Dory Year: 2004
C-Dory Model: 25 Cruiser
Vessel Name: Catch 22
Photos: Catch 22
|
Posted: Fri Mar 27, 2020 8:30 pm Post subject: Replacing the fresh water tank in a 25’ C-dory |
|
|
Hey all,
I have searched past threads so forgive me if this has been covered. I could not find the information I am looking for.
I have 2005 25’ cruiser and tomorrow I am going to cut the v-birth open and begin replacing the water tank. It looks like my available hight and width is about 13”x16”.
Questions:
What can I expect when I cut it open? Is the tank right behind the bulkhead?
What tanks have people installed? Brands? Dimensions?
Has anyone replaced the tank before? Did you pull it out through the back or top of the enclosure?
If we want to go 8-10 days without having to fill up, what size tank should I install? _________________ Kevin Richards - Catch 22 |
|
Back to top |
|
|
tsturm
Joined: 01 Nov 2003 Posts: 1136 City/Region: Soldotna
State or Province: AK
C-Dory Year: 2003
C-Dory Model: 25 Cruiser
Vessel Name: JMR TOO
Photos: JMR-TOO
|
Posted: Fri Mar 27, 2020 10:35 pm Post subject: Re: Replacing the fresh water tank in a 25’ C-dory |
|
|
Catch 22 wrote: | Hey all,
I have searched past threads so forgive me if this has been covered. I could not find the information I am looking for.
I have 2005 25’ cruiser and tomorrow I am going to cut the v-birth open and begin replacing the water tank. It looks like my available hight and width is about 13”x16”.
Questions:
What can I expect when I cut it open? Is the tank right behind the bulkhead?
What tanks have people installed? Brands? Dimensions?
Has anyone replaced the tank before? Did you pull it out through the back or top of the enclosure?
If we want to go 8-10 days without having to fill up, what size tank should I install? |
On my 2003 the tank is right behind the bulkhead(?) and is foamed in place. Another lovely mess. I did not replace mine just tightened a fitting. |
|
Back to top |
|
|
Micahbigsur@msn.com
Joined: 27 May 2019 Posts: 484 City/Region: Big Sur
State or Province: CA
C-Dory Year: 2003
C-Dory Model: 25 Cruiser
Vessel Name: Sierra
Photos: Sierra
|
Posted: Sat Mar 28, 2020 2:10 am Post subject: |
|
|
We also have an '03 I have opened up the v-berths with storage hatches and dug out all the foam, the water tank is just in front of the bulkhead. You probably will have to cut the v-berth above to remove the tank, newer 25 have the water tank in the stern where our waste tank is so it may be hard to get a new replacement that is a perfect fit. If you can't find one you can investigate flexable water bladders.
I believe that in the way the v-berth is designed and installed that it is an important structural member stiffening the hull. Any large areas cut out will have to be replaced with fiberglass structure that is of equal stiffness to the balsa cored laminate removed.
Good luck, and let us know how you solve your tank problem.
Micah _________________ Micah Curtis and Dana, RN
2003 C-dory 25 Sierra, 200, 9.9 and 2.5 Suzukis
2012 R25 SC Sequoia (2015-2018)
1978 Folkes 38 SV Audacious (2006-2015)
Micah, KJ6GUF, Dana, KJ6GXG |
|
Back to top |
|
|
tsturm
Joined: 01 Nov 2003 Posts: 1136 City/Region: Soldotna
State or Province: AK
C-Dory Year: 2003
C-Dory Model: 25 Cruiser
Vessel Name: JMR TOO
Photos: JMR-TOO
|
Posted: Sat Mar 28, 2020 9:16 am Post subject: |
|
|
If I was going to replace, I think I would build one out of 1/4" plywood or foam board & fiberglass could make it fit any contour.
|
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20875 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Sat Mar 28, 2020 12:31 pm Post subject: |
|
|
I have built both integral water and fuel tanks. You want to consider what material you use for the inner lining.
Not all of the 25's have similar water tanks. I have seen one, where the tank was forward of the cutout in the middle of the V Berth.
Ronco has the best selection of water tanks _________________ Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
Back to top |
|
|
Micahbigsur@msn.com
Joined: 27 May 2019 Posts: 484 City/Region: Big Sur
State or Province: CA
C-Dory Year: 2003
C-Dory Model: 25 Cruiser
Vessel Name: Sierra
Photos: Sierra
|
Posted: Sat Mar 28, 2020 4:10 pm Post subject: |
|
|
I think tsturm's solution may be the best if you have the skills. I have built water tanks for a previous boat that way and they worked out great. You have to finish the interior with a food safe coating.
Good luck, Micah |
|
Back to top |
|
|
|